RACK DRY
Installing the drying rack
1.Open the dryer door.
2.Position the drying rack in the tumbler, placing the rear legs in the two recessed areas of the dryer’s back wall.
3.Place the front lip of the drying rack on top of the lint filter.
4.Place the items to be dried on the rack, leaving space between them so air can reach all surfaces.
5.Close dryer door.
6.Use the Time Dry cycle. Select the time according to the moisture and weight of the items. Start dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS | SUGGESTED TEMP. SETTINGS |
|
|
Washable sweaters | Heat (Low/Extra Low) |
(block to shape and lay flat on rack) |
|
|
|
Stuffed toys | Heat (Low/Extra Low) |
(cotton or polyester fiberfilled) |
|
|
|
Stuffed toys | Air Fluff |
(foam or |
|
|
|
Foam rubber pillows | Air Fluff |
|
|
Sneakers | Fluff or Heat |
|
|
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and WARNING lead to a fire hazard.
02 Operating Instructions, Tips