Samsung DC68-02836B user manual Troubleshooting

PROBLEM	SOLUTION
Shuts off before load is dry	• Dryer load is too small. Add more items or a few towels and restart
	the cycle.
	• Dryer load is too large. Remove some items and restart the dryer.
Lint on clothes	• Make sure the lint filter is cleaned before every load. With some loads
	that produce high amounts of lint, it may be necessary to clean the
	filter during the cycle.
	• Some fabrics are lint producers (for example, a fuzzy white cotton
	towel)and they should be dried separately from clothes that are lint
	trappers(for example, a pair of lack linen pants)
	• Divide larger loads into smaller loads for drying
	• Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled after	• Small loads of 1 to 4 items work best.
Wrinkle-Care	• Load fewer garments.Load similar-type garments.
Odors remain in clothing	• Fabrics containing strong odors should be washed in a normal cycle.
after Refresh.
Water drips from nozzle	• This is steam condensation. The dripping water will stop after a short
when Steam-Care starts	time.
Sprayed water is not visible	• Sprayed water is difficult to see when the door is closed
during Steam-Care

05 troubleshooting

DV520AE-02836B_EN.indd 33

troubleshooting _33

2010-06-03 �� 5:38:27