minutes.
1. Open the loading door, place the laundry inside and fill detergent drawer.
2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions.
3. Press “Time delaying” buttons “+” and
4. Press “Start/Pause/Cancel” button. Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light up. The “:” in the middle of the displayed time delay will start to flash.
• More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol fades and the washing starts as the program duration is displayed.
Changing the delay time
If you want to change the time during the countdown:
1.Press “Start/Pause/Cancel” button. “ : “ in the middle of the screen will stop flashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade.
2.Press “Time delaying” buttons “+” or
3.Press “Start/Pause/Cancel” button. The
Time delaying symbol will light up. The Standby symbol will fade. The Start symbol will light up.
4.The “:” in the middle of the displayed time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay countdown and start the program immediately:
1.Press “Start/Pause/Cancel” button. The “:” in the middle of the displayed time delay will stop flashing.
2.Start symbol will fade. The standby symbol and the time delaying symbol will flash.
3.Press time delaying button
Program duration after 30 minutes shall
be displayed.
4.Press Start/Pause/Cancel Button to start the program.
Starting the Program
1.Press Start/Pause/Cancel button to start the program.
2.The start symbol which indicates that the program has started will light up.
3.The door locks and the door locked symbol will light up.
4.The Symbol of the relevant step
(prewash, main wash, rinse, softener and spin) that the program has started from will light up.
Progress of program
The progress of a running program is shown through a number of symbols on the screen.
•At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the far right of the series of symbols indicates the step that is being carried out.
Pre-wash
When “prewash” auxiliary function is selected, prewash symbol will light up to indicate the beginning of prewash step.
Main wash
Main wash symbol will light up to indicate that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of the rinse step.
Softener
Softener symbol lights up at the beginning of softener step.
Spin
Spin symbol will light up at the beginning of the final spin, during “Spin” and “Pump” special programs.
•If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the machine.
21 - EN