Beko WMB81445L Installation, Removing packaging reinforcement, Opening the transportation locks

Page 9

3Installation

Removing packaging reinforcement

Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locks

C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!

1.Loosen all the bolts with a spanner until they rotate freely (“C”)

2.Remove transportation safety bolts by turning them gently.

3.Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the appliance without the transportation safety bolts properly fixed in place!

Appropriate installation location

Install the appliance in environments which have no risk of freezing, in a stable and level position.

C The floor must be capable of carrying the load on it!

C If the washing machine and a drier are placed on top of each other, their approximate weight together may reach 180 kg when they are full.

Important:

Do not place the appliance on top of the power cable.

Keep at least 1cm distance from the edges of other furniture.

Place the machine on a firm surface; do not position it on a long pile rug or such like surfaces.

Adjusting the feet

C Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged.

1.Manually (by hand) loosen the lock nuts on the feet.

2.Adjust them until the machine stands level and firm.

3.Important: Tighten all lock nuts up again.

9 - EN

Image 9
Contents Automatic Washing Machine Important information or useful hints about usage Please read this manual firstTable of Contents Your Washing Machine OverviewDetergent Drawer Control Panel Door Filter Cap Top Lid Specifications Safety instructions General SafetyFirst Use Intended useIf there are children in your House Electrical connectionElectrical requirements Connect the green yellow or green Fitting a different plugAppropriate installation location InstallationAdjusting the feet Removing packaging reinforcementConnecting to the drain Connecting to the water supplyDisposing of the old machine Destroying the packaging materialSorting the laundry Initial preparations for washingPreparing clothes for washing Correct load capacityDetergents and softeners Loading doorSoftener Wipe the inside of the drum after using starchLiquid detergent StarchStart/Pause/Cancel Button Display symbolsSelecting a Program and Operating Your Machine Control panelTurning the machine on Program selectionAdditional programs Special programs Temperature selectionEconomy Symbol Shows energy saving programs and temperature selectionsSpin Speed selection Selectable Program and consumption tableTime display Auxiliary functionsProgress of program Starting the ProgramEnding the program through canceling Switching the machine to standby modeProgram in rinse hold mode Changing the selections after the program has startedEnd of program Quick instructions for daily use Leave the loading door and detergent drawer open to dry Turn the water tap offDetergent drawer Cleaning and careDoor and the drum Outer cabinet and control panelTighten the hose nuts by hand Draining any remaining water and cleaning the pump filterClose the filter cap Cause Explanation / Suggestion Solution suggestions for problemsPage Page Page There is foaming over the detergent drawer Page Guarantee UK Mainland & Northern Ireland ServiceWashing Machines 0845 600 Dishwashers Republic of IrelandPage Page