Beko WMB 81442 LW user manual Operating the product Starting the programme, Progress of programme

Page 28

Operating the product

5.13 Starting the programme

1.Press Start / Pause / Cancel button to start the programme.

2.Start symbol showing the startup of the programme will turn on.

3.Loading door is locked and Door Locked symbol appears on the display.

4.The symbol of the step from which the programme has started appears on the display (Prewash, Main Wash, Rinse, Softener and Spin).

5.14 Progress of programme

Progress of a running programme is indicated on the display with a set of symbols.

Relevant symbol appears on the display at the beginning of each programme step and all symbols remain lit at the end of the programme. The farthermost right symbol indicates the current programme step.

Prewash

If the Prewash auxiliary function is selected, Prewash symbol appears on the display indicating that the prewash step has started.

Main Wash

Main Wash symbol indicating that the main wash step has started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has started appears on the display.

Softener

Softener symbol indicating that the softener step has started appears on the display.

Spin

Appears at the beginning of the final spin step and remains lit during Spin and Pump special programmes.

C If the machine does not pass to the spinning step, Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine.

5.15 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.

Door Locked symbol appears when the loading door is locked. This symbol will flash until the loading door becomes ready to open when programme completes or the machine is paused. Do not force to open the loading door in this step. Symbol disappears when the door is ready to open. You can open the door when the symbol

disappears.

5.16Changing the selections after programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to switch the machine to pause mode. Pause symbol appears on the display indicating that the machine is paused. Start symbol disappears.

F1

F2

F3

F4

Changing the speed and temperature settings for auxiliary functions

Depending on the step the programme has reached, you may cancel or activate the auxiliary functions; see, "Auxiliary function selection". You may also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".

Adding or taking out laundry

1.Press the Start / Pause / Cancel button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.

2.Wait until the Loading Door can be opened.

3.Open the Loading Door and add or take out the laundry.

28 / 42 EN

Washing Machine /User’s Manual

 

 

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Washing Machine Dear Customer Explanation of symbols Important information or useful hints about usageImportant instructions for safety Environment4 InstallationMaintenance and cleaning TroubleshootingImportant instructions for safety and environment General safetyUnplug the product when not in use Service life of your product is 10 yearsPackage information Compliance with Weee DirectiveDisposing of the waste product This appliance’s packaging material isPower cable Your washing machineOverview Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Stand-by mode power W Off-mode power W Main model codeSpin speed rpm/ min., max Single Water inlet / Double Water inlet Woolmark NoInstallation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksInstallation Connecting water supplyConnecting to the drain 10 / 42 EN11 / 42 EN Adjusting the feetGet damaged Fitting a different plug Installation Electrical connection12 / 42 EN 13 / 42 EN Sorting the laundry Preparation14 / 42 EN Preparation Preparing laundry for washing Initial useThings to be done for energy saving 15 / 42 ENPreparation Correct load capacity Using detergent and softenerLoading the laundry Adjusting detergent amount PreparationUse different detergents for coloured and white laundry 17 / 42 ENUsing starch Using bleachesDo not use softener and starch together in a washing cycle Do not use bleaching agent and detergent by mixing themPreparation Tips for efficient washing 19 / 42 ENDisplay symbols Operating the productControl panel On / Off buttonOperating the product Preparing the machine Programme selectionMain programmes Additional programmesOperating the product Temperature selection Operating the product Special programmesSpin speed selection 23 / 42 ENOperating the product Programme and consumption table 24 / 42 EN25 / 42 EN On the panelOperating the product Auxiliary function selection PrewashExtra Rinse 26 / 42 ENTime display Operating the product Starting the programme Progress of programmeLoading door lock Changing the selections after programme has startedCancelling the programme Machine is in Rinse Hold modeChild Lock End of programmeYour machine is equipped with a Standby Mode 30 / 42 ENQuick User Guide 31 / 42 ENCleaning the loading door and the drum Cleaning the detergent drawerMonths Maintenance and cleaning Cleaning the water intake filtersCleaning the body and control panel Draining remaining water and cleaning the pump filterPull the emergency draining hose out from its seat Install the filter34 / 42 EN Troubleshooting 35 / 42 ENProgramme cannot be started or selected Machine does not fill with waterTroubleshooting 36 / 42 EN37 / 42 EN It does not rinse well38 / 42 EN Detergent residue in the detergent drawerWater pressure is low. Check the water pressure Foam is overflowing from the detergent drawerOn / Off button might not be pressed. Press On / Off button Loading door may be open. Close the loading door39 / 42 EN Machine does not start. Nothing appears on the displayComplying Commission Delegated Regulation EU No 1061/201 40 / 42 EN41 / 42 EN 42 / 42 EN Service Washing MachinesGuarantee Washing Machines, Dishwashers and Electric Cookers
Top Page Image Contents