Electrolux EWD 1419 I manual Programme information, Interrupting a programme

Page 10

Interrupting a programme

Depress the Start/Pause button to interrupt a programme which is running: the corresponding light starts to flash.

Depress the same button to restart the programme.

Opening the door after the programme has started

You can open the door, after having set the washer-dryer to PAUSE, provided the following conditions exist:

the drum temperature is lower then 55°C;

the level of the water is not high;

the drum is not turning.

If these requirements are met, when you pause the washing machine, the door can be opened.

Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button.

After approximately 3 minutes, you can open the door.

Pay attention to the level and temperature of the water in the machine!

When you close the door and press the ON/OFF button again, the machine will resume the programme from the point where it had been interrupted.

Programme information

Handwash / Wool

Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol.

Rinses

With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at 1400 r.p.m.

The spin speed can be reduced by depressing “Spin speed” button.

Drain

For emptying out the water of the last rinse in programmes with the Rinse Hold or Night Cycle option.

Turn first the programme selector dial to Off, then select programme “Drain” and depress the Start/Pause button.

Spin

Separate long spin at the maximum speed for hand washed cotton garments. You can reduce the speed by means of “Spin speed” button to adapt it to the fabrics to be spun.

Easy iron

With this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. To be used for synthetic items.

Washing temperature: 40°C

Final spin speed: 900 r.p.m.

Miniprogram

This is a complete programme that can be combined with the following options: Spin speed, Rinse Hold or Night Cycle and Delay Start.

To be used for laundry which is lightly soiled or which needs freshening up.

Max load: 2 kg.

Washing temperature: 30°C

Programme duration: 30 minutes

Final spin speed: 700 r.p.m.

Off = Reset/Cancelling

To reset a programme turn the selector dial to Off. Now can a new programme be selected.

10

Image 10
Contents Instruction Booklet Child Safety InstallationUse Contents Ecological hints Your New Washer-DryerInterest Environment Description of the Appliance Child safety featureDetergent dispenser drawer ON/OFF button Control PanelMAINS-ONlight Prewash buttonNight cycle button Delay start buttonQuick wash button Sensitive buttonNow you can select a new programme Selected drying time is displayed in minutesAltering an option or a running programme Programme selector dialEnd of programme Cotton Synthetics DelicatesInterrupting a programme Programme informationOpening the door after the programme has started Load the laundry Switch the machine onOperating Sequence Select the required programmeSelect the required options Select the Delay Start optionSelect the Spin speed or Rinse Hold option Start the programmeDrying only Automatic washing and drying NON-STOP programmeWashing and Drying Hints 1000g = 1 kgWhich form? Which detergent?Laundry and placed in the tumble dryer Wash Care Symbols Important NotesFabric Description Washing ProgrammesType Programme Additional Max MinProgramme description Functions Load Special ProgrammesAdditional Max Night cycle optionExtra dry Drying ProgrammesType of fabric Max. load Spin speed Drying time Store dryMaintenance and Cleaning Emergency emptying out Water inlet filterSomething Not Working Symptom Possible causes Service & Spare Parts0870 5 European guarantee Guarantee ConditionsStandard guarantee conditions CustomerWashing Installation InstructionsTechnical Specifications DryingPositioning Install the machine on a flat hard floorUnpacking Water inletInto a drainage standpipe Water drainageJoining piece must have an internal diameter of 18mm StandpipeSpecial conditions LevellingInterest of the environment Permanent connection Electrical connectionBlue- Neutral Brown- Live Preparation and assembly of the door Building-inDrill four fixing holes see Fig. G Electrolux plc