Electrolux EWD 1419 I Select the Spin speed or Rinse Hold option, Select the required options

Page 12

5.Select the Spin speed or Rinse Hold option

Depress the spin speed button to choose the required speed or Rinse Hold option : the corresponding light comes on.

1400

1200

900

700

Spin

speed

6. Select the required options

The light corresponding to the depressed button illuminates.

During this period it is possible to load other laundry: press the Start/Pause button. Open the door. Load the laundry. Close the door and press the Start/Pause button again.

8. Start the programme

To start the selected programme, press the Start/Pause button; the corresponding light stops flashing and the pilot light corresponding to the wash phase which is running is illuminates.

The machine starts operating.

Start/

Pause

 

 

 

 

 

 

Prewash

Quick

Night Sensitive

 

 

 

wash

Cicle

 

 

 

 

 

 

 

 

 

 

 

7. Select the Delay Start option

To delay starting of a programme, press the “Delay start” button. The corresponding light illuminates. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.

When the Start/Pause button is pressed, the selected delay will again appear on the display and the machine starts its countdown.

Delay

start

If the Delay Start option has been selected the programme will start at the end of the countdown.

9. At the end of the programme

The machine stops automatically. The display shows a blinking zero.

If the Rinse Hold or Night Cycle option has been selected, the door will be locked, the light of the Start/Pause button goes out, the Rinse Hold and “End” lights in the programme progress display remain lit to indicate that the water must be drained before opening the door. The display shows a flashing zero.

To empty out the water you can, after turning the programme selector dial to Off position:

select programme Drain, the water is emptied out without spinning

select programme Spin. Select the spin speed by means of the relevant button and then depress the Start/Pause button. The water is emptied out and the laundry is spun at the selected spin speed.

At the end of the cycle, the light of the Start/Pause button goes out, and the End light illuminates. The door can be opened.

Turn the programme selector dial to Off (Reset).

12

Image 12
Contents Instruction Booklet Installation Child SafetyUse Contents Your New Washer-Dryer Ecological hintsInterest Environment Child safety feature Description of the ApplianceDetergent dispenser drawer Control Panel MAINS-ONlightON/OFF button Prewash buttonDelay start button Quick wash buttonNight cycle button Sensitive buttonNow you can select a new programme Selected drying time is displayed in minutesProgramme selector dial End of programmeAltering an option or a running programme Cotton Synthetics DelicatesProgramme information Interrupting a programmeOpening the door after the programme has started Switch the machine on Operating SequenceLoad the laundry Select the required programmeSelect the Delay Start option Select the Spin speed or Rinse Hold optionSelect the required options Start the programmeDrying only Automatic washing and drying NON-STOP programmeWashing and Drying Hints 1000g = 1 kgWhich detergent? Which form?Laundry and placed in the tumble dryer Wash Care Symbols Important NotesWashing Programmes Type Programme Additional MaxFabric Description MinSpecial Programmes Additional MaxProgramme description Functions Load Night cycle optionDrying Programmes Type of fabric Max. load Spin speed Drying timeExtra dry Store dryMaintenance and Cleaning Emergency emptying out Water inlet filterSomething Not Working Service & Spare Parts Symptom Possible causes0870 5 Guarantee Conditions Standard guarantee conditionsEuropean guarantee CustomerInstallation Instructions Technical SpecificationsWashing DryingInstall the machine on a flat hard floor UnpackingPositioning Water inletWater drainage Joining piece must have an internal diameter of 18mmInto a drainage standpipe StandpipeLevelling Special conditionsInterest of the environment Electrical connection Permanent connectionBlue- Neutral Brown- Live Preparation and assembly of the door Building-inDrill four fixing holes see Fig. G Electrolux plc