Selecting the delayed start.
•Select the programme and the required options.
•Select the delay start.
•Press the Start/Pause button: the machine starts its hourly countdown.
The programme will start after the selected delay has expired.
Cancelling the delayed start
•Press the Start/Pause button.
•Press the Delay Start button once until the symbol 0’ is displayed.
•Press the Start/Pause button again.
The Delay Start cannot be selected with Drain 
programme.
Display
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for example 2.05).
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
2.05
After the programme has started, the time remaining is updated every minute.
Washing programme phase icons
By selecting the wash programme, all the washing programme phase icons corresponding to the various phases making up the programme are shown in the upper part of the display.
use electrolux 13
After the machine has started, only the running icon stays on. When the programme has finished, a flashing zero (0.00) is displayed.
Delay
The selected delay (20 hours max) set by pressing the relevant button appears on the display for about 3 seconds, then the duration of the previously selected programme is displayed.
The delay time value decreases by one unit every hour and then, when 1 hour remains, the time decreases every minute.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for about 2 seconds and the red Start/Pause light start flashing.