14electrolux use
Alarm codes
If there is a fault, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
E20
End of programme
When the programme has finished a flashing zero is displayed, the “Door” 
pilot light and the Start/Pause light go out and the door can be opened.
0.00
Heating phase
During the washing cycle the display shows the temperature icon animated to indicate that the appliance has started the heating phase of the water in the tub.
2.05
Select the Start/Pause
To start the selected programme, press the Start/Pause button; the green pilot light stops flashing.
Start/
Pause
The «Door» 
pilot light illuminates to indicate that the appliance starts operating and the door is locked.
The «Door» 
pilot light indicates if the door can be opened:
•light on: the door cannot be opened. The appliance is running.
•light off: the door can be opened. The washing programme is finished.
To interrupt a programme which is running, depress the Start/Pause button: the green pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the Start/Pause button again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, an integrated red pilot light of the Start/ Pause button flashes for 3 times and the message Err is displayed for about 2 seconds.