Electrolux 74825 manual PRE Wash, Setting the delay timer

Page 14

PRE WASH

Warm pre-wash before the main wash that follows automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without inter- mediate spin for DELICATES.

STAIN

For heavily soiled or stained washing. Stain removal agent will be rinsed into the wash at the optimum point in the programme.

Can only be set for wash temperatures of 40°C and upwards as stain re- movers only become effective at higher temperatures.

SENSITIVE

Increased effectiveness of the rinse due to the additional rinse cycle together with decreased drum movement (gentle on fabrics). Ideal when frequent washes are necessary, for example in cases of over- sensitive skin.

Setting the delay timer

3Using the DELAY TIMER button you can delay the start of a programme by 30 minutes (30') to a maximum of 23 hours (23h).

1.Select the programme.

2.Press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi-display, e.g. 12h to delay the start of the pro- gramme by 12 hours. The DELAY TIMER indicator will illuminate.

3If the display is showing 23h and you press the button again, the time delay will be cancelled. 0’ will appear followed by the length of the wash programme that has been set.

3.To activate the delay timer, press the START/PAUSE button. The time re-

maining to the start of the programme will be continuously shown (e.g. 12h, 11h, 10h,... 30' etc.).

14

Image 14

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview RefreshApplication/Features Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent /conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorWashing powder/tablets for the main wash cycle Switching on the appliance/selecting a programmeIf you are using liquid detergent Shortened wash programme for lightly soiled items Changing the spin speed/selecting rinse holdSelecting additional programmes Setting the delay timer PRE WashInterrupting a programme/adding washing Starting a programmeProgramme sequence Interrupting a programmeIf Rinse Hold has been selected End of the wash cycle/removing the washingOverdosing Cleaning procedure Child safety deviceCleaning and maintenance Deactivating the child safety deviceWashing drum Clean the glass in the door and the rubber collar regularlyDetergent dispenser drawer Door and rubber collarRemedying small faults yourself What to do ifBeen removed Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Old appliance DisposalPackaging material Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine UnpackingPage Remove the bracket D Tighten up the six smaller bolts C Where to install Making the appliance levelBrown Live Wire coloured green and yellow Electrical ConnectionPermitted water pressure Connecting to the water supplyPermanent Connection Open the porthole and extract the inlet hose Water inletWater Drainage For drainage into an outlet From your Service Force CentrePumping heights of over 1 metre Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 Page For general enquiries concerning 0870 5 929Customer Care Major Appliances132 977 Subject to change without notice