Electrolux 74825 manual What to do if, Remedying small faults yourself

What to do if...

Remedying small faults yourself

If during use of the appliance one of the following error codes is shown in the multi-display:

–E10 (Problems with the water inflow),

–E20 (Problems with the water outflow),

–E40 (door open),

please consult the following table.

After the error has been remedied, press the START/PAUSE button.

In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE button.

If the error appears again, please contact your local Service Force Cen- tre, stating the error code.

Problem	Possible cause	Remedy
	Mains plug not plugged in	Connect the plug to a mains
	or fuse not working.	socket. Check fuse.
Washing machine is not	Loading door not closed	Close loading door - there
	properly.	should be an audible click.
working.
	The START/PAUSE button	Press the START/PAUSE for a
	has not been pressed for
		longer period of time.
	long enough.
The door cannot be	The child safety device has	Deactivate the child safety
closed.	been activated.	device.
When a button is	The selected function can-	Select another function.
pressed, Err appears in	not be combined with the
the multi-display.	programme set.
E40 appears.
The END indicator	The door is not closed prop-	Close the door properly. Re-
flashes 4x, and an
	erly.	start the programme.
acoustic signal sounds
4x.
E10 appears.	Tap turned off.	Turn on the tap.
The END indicator		Turn off the tap. Unscrew the
flashes 1x, and an	The filter in the threaded in-
acoustic signal sounds	let hose fitting is blocked.	hose, take out the filter and
		clean it.
1x.
(Problems with water	Water tap is furred with	Check the tap and have it re-
inflow.)	lime scale or is faulty.	paired, if necessary.

19