Electrolux 74825 manual End of the wash cycle/removing the washing, Overdosing

Page 16

End of the wash cycle/removing the washing

At the end of the programme, END lights up on the programme progress display. The door can be opened as soon as the DOOR indicator is lit green.

1.Open the loading door and remove the washing.

2.Turn the programme knob to OFF.

3.Close the water valve.

4.After washing, pull out the detergent drawer a little to enable it to dry out. Keep the loading door very slightly open so that the washing ma- chine can air.

If RINSE HOLD has been selected:

After the rinse hold, END lights up on the programme progress display. The water must first be drained:

–Either turn the programme knob to OFF, then to DRAIN and press the START/PAUSE button (the water is drained without spinning),

–or turn the programme knob to OFF and then to SPIN. Change the spin speed if necessary and press the START/PAUSE button (the water is drained and the washing spun).

Overdosing

3If the OVERDOSING indicator is illuminated, too much detergent was used in the previous programme. The next time you wash, observe the detergent manufacturer’s instructions concerning amount of detergent required, and the amount of items you wash in one load.

16

Image 16

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationSafety Prior to using the appliance for the first timeChild safety Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview RefreshApplication/Features Care Symbols1 Before the first wash Preparing and sorting washingPreparing washing Sorting washingRunning a wash cycle Opening the door/loading washingAdding detergent /conditioner Open the door pull the handle on the doorIf you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Selecting additional programmes Changing the spin speed/selecting rinse holdShortened wash programme for lightly soiled items Setting the delay timer PRE WashStarting a programme Programme sequenceInterrupting a programme/adding washing Interrupting a programmeOverdosing End of the wash cycle/removing the washingIf Rinse Hold has been selected Child safety device Cleaning and maintenanceCleaning procedure Deactivating the child safety deviceClean the glass in the door and the rubber collar regularly Detergent dispenser drawerWashing drum Door and rubber collarRemedying small faults yourself What to do ifBeen removed If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Packaging material DisposalOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inInstalling the appliance When using a sack trolley to transport the washing machineTransporting the appliance UnpackingPage Remove the bracket D Tighten up the six smaller bolts C Where to install Making the appliance levelBrown Live Wire coloured green and yellow Electrical ConnectionPermanent Connection Connecting to the water supplyPermitted water pressure Water Drainage Water inletOpen the porthole and extract the inlet hose Pumping heights of over 1 metre From your Service Force CentreFor drainage into an outlet Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 Page 0870 5 929 Customer CareFor general enquiries concerning Major Appliances132 977 Subject to change without notice