Electrolux 88810 manual What to do if, Door and rubber collar, Remedying small malfunctions

Page 28

Door and rubber collar

Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small malfunctions

If while the appliance is operating a short acoustic signal sounds 3 times and one of the following messages appears in the display:

–“No incoming water/Check tap & Hose”,

–“No drain - check/drain hose/filter” or “Pump Blocked”,

–“Door not Closed”,

please have a look at the following table.

When the fault is remedied, press the START/PAUSE key.

If “Warning : E and number or letter” is displayed: Switch the appliance off and on again. Re-set the programme. Press the START/PAUSE key. If the warning is displayed again, please contact the Service Force Centre and inform them of the warning.

Problem

Possible cause

Remedy

 

Mains plug not plugged

Plug in mains plug. Check

 

in or fuse not working.

fuse.

 

 

 

Washing machine does not

Door not closed properly.

Close door - there should be

an audible click.

work.

 

 

 

START/PAUSE key was

Press START/PAUSE key for

 

not pressed for long

 

longer.

 

enough.

 

 

 

Child safety device en-

Release the child safety de-

The door cannot be closed.

gaged.

vice.

 

 

The selected function

 

Display shows: ”Selection

cannot be combined

Make another selection.

error”.

with other programme

 

 

settings.

 

Display shows: “Door not

Door not closed properly.

Close door - there should be

an audible click.

Closed/Please check”

 

Start programme again.

 

 

 

 

 

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents
Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationSafety Prior to using the appliance for the first timeChild safety Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardWhat is shown in the display Cycle end atProgramme overview Easy IronProgrammes/features Care Symbols1 Prior to using for the first time N g u a g eR a c h e Programmende umSetting the time Preparing and sorting washingCarrying out a wash programme prior to first use Preparing washingAdding detergent /conditioner Running a wash cycleWashing powder/tablets for the main wash cycle Switching on the appliance/selecting a program If you are using liquid detergentLINEN/EASY Care Changing spin speed/selecting rinse holdOpening the door/Loading the washing Current load displaySetting options SetupTo switch off the option PrewashingSensitive Prewash, Sensitive, Stain, Night CycleSetting times Delay StartTime saving Time Saving Short or Very ShortDelay Start Start in 4hStart Press the OK key. Start in 0 min is shown in the displayWashing Starting a programmeProgramme progress Interrupting a programme/Adding washingSetup Washing cycle complete/Removing the washingMemory 1, 2 If Rinse Hold or Night Cycle was selectedMemory Store program Setting the MemoryChanging the Memory N s e + U n dExtra Rinse Language Set time Clock Desired setting. With Contrast and brightnessEach press of the key or if Black triangle in the diaChild safety device Deactivating the child safety deviceCleaning and maintenance Cleaning procedureDetergent dispenser drawer Washing drumClean the glass in the door and the rubber collar regularly What to do ifDoor and rubber collar Remedying small malfunctionsTap turned off Turn the tap on If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Packaging material DisposalOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inInstalling the appliance When using a sack trolley to transport the washing machineTransporting the appliance Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermanent Connection Connecting the appliance to the water supplyPermitted water pressure Water inlet 35m long pressure hose is supplied with the applianceWater Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Warranty conditions Great BritainPage Page 0870 5 929 Customer CareFor general enquiries concerning Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents