Electrolux 88810 manual Water inlet, 35m long pressure hose is supplied with the appliance

Page 41

Water inlet

A 1.35m long pressure hose is supplied with the appliance.

If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths.

3 Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. Do not use any other sealing rings.

Important! All threaded hose fit- tings must only be tightened by hand.

1.Connect the hose with the right-an-

gle connector to the machine.

Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration.

2.Connect the hose with the straight

connector to a water tap with an R ¾ (inch) screw thread.

3. Slowly turn on the tap and check that all connections are watertight.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents
Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsPrior to using the appliance for the first time SafetyChild safety Follow the Installation and connection instructionsResulting overheating may constitute a fire hazard General safetyCycle end at What is shown in the displayEasy Iron Programme overviewProgrammes/features Care Symbols1 N g u a g e Prior to using for the first timeR a c h e Programmende umPreparing and sorting washing Setting the timeCarrying out a wash programme prior to first use Preparing washingWashing powder/tablets for the main wash cycle Running a wash cycleAdding detergent /conditioner If you are using liquid detergent Switching on the appliance/selecting a programChanging spin speed/selecting rinse hold LINEN/EASY CareCurrent load display Opening the door/Loading the washingSetup Setting optionsPrewashing To switch off the optionSensitive Prewash, Sensitive, Stain, Night CycleDelay Start Setting timesTime saving Time Saving Short or Very ShortStart in 4h Delay StartStart Press the OK key. Start in 0 min is shown in the displayStarting a programme WashingProgramme progress Interrupting a programme/Adding washingWashing cycle complete/Removing the washing SetupMemory 1, 2 If Rinse Hold or Night Cycle was selectedChanging the Memory Setting the MemoryMemory Store program Extra Rinse U n dN s e + Clock Set timeLanguage Contrast and brightness Desired setting. WithEach press of the key or if Black triangle in the diaDeactivating the child safety device Child safety deviceCleaning procedure Cleaning and maintenanceDetergent dispenser drawer Washing drumWhat to do if Clean the glass in the door and the rubber collar regularlyDoor and rubber collar Remedying small malfunctionsTap turned off Turn the tap on There are grey stains on the washing If the wash result is not satisfactoryFoam can still be seen following the final rinse There are white residues on the washingCarrying out an emergency drain When the water has all drained awayDrain pump Old appliance DisposalPackaging material Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationWhen using a sack trolley to transport the washing machine Installing the applianceTransporting the appliance Removing the transit packaging Where to install If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermitted water pressure Connecting the appliance to the water supplyPermanent Connection 35m long pressure hose is supplied with the appliance Water inletFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Great Britain Warranty conditionsPage Page Customer Care 0870 5 929For general enquiries concerning Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents