Electrolux 88810 0870 5 929, Customer Care, For general enquiries concerning, Major Appliances

Page 47

Service and Spare Parts

If the event of your appliance requiring service, or if you wish to pur- chase spare parts, please contact Service Force by telephoning:

0870 5 929 929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area.

For the address of your local Service Force Centre and further informa- tion about Service Force, please visit the website at

www. serviceforce.co.uk

Before calling out an engineer, please ensure you have read the details under the heading „What to do if...“

When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and post code.

2.Your telephone number.

3.Clear and concise details of the fault.

4.The model and serial number of the appliance (found on the rating plate)

5.The purchase date.

Please note that a valid purchase re- ceipt or guarantee documentation is required for in-guarantee service calls.

Customer Care

For general enquiries concerning

your AEG-Electrolux appliance, or for further information on AEG-

Electrolux products please contact our Customer Care Department by

letter or telephone at the address below or visit our website at www.aeg.co.uk.

Customer Care Department

For Customer Service in the Republic

Major Appliances

of Ireland please contact us at the ad-

AEG-Electrolux

dress below:

Domestic Appliances

AEG/ Electrolux Group (Ire) Ltd

Addington Way

Long Mile Road/ Dublin 12

Luton

Republic of Ireland

Bedfordshire, LU4 9QQ

Tel: +353 (0) 1 4090754

Tel: 08705 350350 (*)

Email: service.eid@electrolux.ie

(*) Calls may be recorded for training purposes

47

Image 47 Contents
Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyCycle end at What is shown in the displayEasy Iron Programme overviewProgrammes/features Care Symbols1 Programmende um Prior to using for the first timeN g u a g e R a c h ePreparing washing Setting the timePreparing and sorting washing Carrying out a wash programme prior to first useWashing powder/tablets for the main wash cycle Running a wash cycleAdding detergent /conditioner If you are using liquid detergent Switching on the appliance/selecting a programChanging spin speed/selecting rinse hold LINEN/EASY CareCurrent load display Opening the door/Loading the washingSetup Setting optionsPrewash, Sensitive, Stain, Night Cycle To switch off the optionPrewashing SensitiveTime Saving Short or Very Short Setting timesDelay Start Time savingPress the OK key. Start in 0 min is shown in the display Delay StartStart in 4h StartInterrupting a programme/Adding washing WashingStarting a programme Programme progressIf Rinse Hold or Night Cycle was selected SetupWashing cycle complete/Removing the washing Memory 1, 2Changing the Memory Setting the MemoryMemory Store program Extra Rinse U n dN s e + Clock Set timeLanguage Black triangle in the dia Desired setting. WithContrast and brightness Each press of the key or ifDeactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerRemedying small malfunctions Clean the glass in the door and the rubber collar regularlyWhat to do if Door and rubber collarTap turned off Turn the tap on There are white residues on the washing If the wash result is not satisfactoryThere are grey stains on the washing Foam can still be seen following the final rinseCarrying out an emergency drain When the water has all drained awayDrain pump Old appliance DisposalPackaging material Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transit packaging Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceWhere to install If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermitted water pressure Connecting the appliance to the water supplyPermanent Connection 35m long pressure hose is supplied with the appliance Water inletFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Great Britain Warranty conditionsPage Page Major Appliances 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG