16Use
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. At the end of the programme, 0 and RINSE HOLD symbol appear on the display, DOOR symbol (door locked) remains lit, the pilot light of button 7 goes off and the door is locked to indicate that the water must be emptied out.
NIGHT CYCLE: by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing cycle is very quiet and it can be selected at night or in times with a more economical power rate. In some programmes the rinses will be performed with more water. At the end of the programme, 0 and RINSE HOLD symbol appear on the display, the DOOR symbol remains lit, the pilot light of button 7 goes off and the door is locked to indicate that the water must be emptied out.
To empty out the water, please read chapter «At the end of the programme».
Select the desired option by pressing the button 4 and confirm your choice by pressing the button 5
Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible among themselves. The symbols of the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme or any other option, is selected, the Err message is displayed for a few seconds and the yellow pilot of button 7 light starts blinking.
You must select the options after you have selected the programme but before pressing the button 7. Press the button 4: all the option symbols appear on the display.
To scroll all the available options, press the button 4. The corresponding symbol appears on the display and starts blinking.
Press the button 5 to activate and confirm your choice. A black dash appears under the selected symbol to indicate that this option has been set. Press the same button to deactivate the option.
After selecting the options, wait a few seconds until the display gets back to the default status. The selected options appear on the display.
For the compatibility between this option and washing programmes consult the chapter «Washing programmes».