20Use
At the end of the programme
The machine stops automatically, the pilot light of button 7 pilot light goes off, a blinking 0 appears on the display and the acoustic signal sounds for some minutes.
If you have chosen a programme or an option that ends with water in the tub, follow the below instruction to empty the water out:
●turn the programme selector dial to OFF
●select the DRAINING or SPINNING programme
●reduce the spin speed if needed, by means of the relevant button
●press the button 7
●when the programme has finished the display shows a blinking 0. On the display the DOOR symbol disappears and the door can be opened.
Turn the programme selector dial to OFF to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.