Use 19
●Press button 7: the machine starts its hourly countdown. The programme will start after the selected delay has expired.
Cancelling the delayed start after having started the programme:
●set the washing machine to PAUSE by pressing the button 7;
●press the button 8 until the symbol 0’ is displayed;
●press the button 7 again to start the programme.
The button 8 cannot be selected with DRAIN programme.
Altering an option or a running programme
It is possible to change a few options before the programme carries them out. Before you make any change, you must pause the washing machine by pressing the button 7.
Changing a running programme is possible only by resetting it. Turn the programme selector dial to OFF and then to the new programme position. Start the new programme by depressing the button 7 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 7 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to OFF to cancel a programme which is running. You can now select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7.
●if the DOOR symbol disappears, the door can be opened.
●if the DOOR remains lit, it means that the machine is already heating or that the water level is too high. In this case the door cannot be opened.
●If you cannot open the door but you need to open it, you have to switch the machine off by turning the selector dial to OFF. After a few minutes the door can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme again and to press button 7.