Electrolux 76640 manual What to do if, Trouble Shooting

Page 32

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Important: If you call out an engineer to a fault listed below, or to re- pair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code E10, E20 or E40 is shown in

the multi-display, you may be able to remedy the fault yourself (see the Faults table below).

After clearing the fault, press the START/ PAUSE button. If the fault code is displayed again, contact your local AEG Service Force Centre.

For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

Problem

Possible Cause

Remedy

 

The mains plug is not

Plug in the mains plug.

 

plugged in.

 

 

 

The house fuse has blown.

Replace the fuse.

 

 

 

The washing machine

The door is not correctly

Close the door; The lock must

does not work.

closed.

engage audibly.

 

 

START/PAUSE button not

Keep the START/PAUSE but-

 

ton pressed until the pro-

 

pressed long enough.

 

gramme begins.

 

 

 

 

 

 

 

Cancel the child safety fea-

Door cannot be closed.

The child safety feature is set

ture (see Section "Child

 

 

Safety Feature“).

The fault code E40

The door is not correctly

Close the door correctly.

appears. The display

closed.

Start the programme again.

MAIN WASH flashes.

 

 

 

 

 

32

Image 32
Contents ÖKO-LAVAMAT 76640 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDetergent dispenser drawer Description of the ApplianceFront view Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washMent products are only effective at higher temperatures Programme option buttonsWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataSorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washingSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmlyIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Multi-display Washing Programme ProgressProgramme progress display Selecting the programme options Changing or cancelling the wash programmeChanging the washing programme Washing cycle is complete/Removing the washing Programme Tables WashingSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Cancelling the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Earth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Warranty conditions Great BritainPage Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG