Electrolux 76640 manual Programme option buttons, Warm pre wash before the main washing cycle

Page 12

Operating Instructions

Programme option buttons

The programme options buttons are used to adapt the washing programme to suit the degree of soil- ing of the washing. The programme options are not needed for normally soiled washing.

The different functions can be combined together depending on the programme.

PRE WASH

Warm pre wash before the main washing cycle

which follows on automatically; with intermediate spin for COTTONS/LINEN and EASY-CARES, without

intermediate spin for DELICATES.

If RINSE HOLD has been selected, no spinning will take place at all.

SOAKING

Approx. 50 minutes at 30°C. Can be extended to a maximum of 10 hours and approx. 20 minutes with the DELAY TIMER button. The main wash programme then follows automatically.

QUICK WASH

Shortened main wash cycle for lightly soiled washing.

	STAIN
	For heavily soiled or stained washing. In-wash stain treatment products
	are washed in at the optimum point in the programme cycle. Can only
	be selected with wash temperatures of 40°C and above, as stain treat-
	ment products are only effective at higher temperatures.
3	When the WOOL/P (hand wash) setting is chosen, the programme op-
	tions cannot be selected (any buttons that are pressed have no effect).

12

Image 12

Contents ÖKO-LAVAMAT 76640 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washMent products are only effective at higher temperatures Programme option buttonsWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataBefore the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Setting the delay timer / soaking duration Delay timerSoaking duration Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmlyIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentIf the delay timer has been set Starting the washing programmePressed, the door is not properly closed Washing Programme Progress Programme progress displayMulti-display Changing or cancelling the wash programme Changing the washing programmeSelecting the programme options Washing cycle is complete/Removing the washing Programme Tables WashingSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Cancelling the additional rinse functionAdditional Rinse RINSE+ Helpful to rinse with extra waterChild Safety Feature Cancelling the child safety featureWashing programme can be StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection TerferenceUser Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Warranty conditions Great BritainPage Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG