Electrolux 76640 manual Water tap is closed Open the water tap No water flows

		Operating Instructions
Problem	Possible Cause	Remedy
	Water tap is closed.	Open the water tap.
No water flows.		Close the water tap. Unscrew
	Filter in screw connection of	the hose from the tap, re-
Fault code E10 ap-
	the inlet hose is blocked.	move the filter and clean un-
pears. The display
		der running water
RINSE + flashes
	Water tap is blocked with	Check the water tap and
	limescale or is faulty.	have it repaired if necessary.
	The transport packaging has	Remove transport packaging
		according to the installation
	not been removed.
		and connection instructions.
		Adjust the feet according to
	The machine is not level.	the installation and connec-
		tion instructions.
The washing machine	There is very little washing in	This does not impair the op-
vibrates during opera-
tion or is unstable.	the drum (e.g. only one	eration of the machine.
	dressing gown).
	The water could not be com-	Check the the drain hose and
		remove any kink if necessary,
	pletely pumped out before	or clean the drain pump and,
	spinning because the drain-
		if required, remove foreign
	age hose is kinked or the
		bodies from the pump hous-
	drain pump is blocked.
		ing.
		It may be necessary to re-
Excessive foaming dur-	Probably too much detergent	duce the amount of deter-
		gent used. Follow the
ing the main wash.	was used.	detergent manufacturer's
		recommendations.

33