Electrolux 76640 manual Carrying out an emergency emptying

Page 37

Operating Instructions

Carrying out an emergency emptying

If the washing machine no longer pumps out the water, emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.

1Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying.

01. Have a flat container on hand to catch the water.

2. Pull down the flap in the right corner of the base strip outwards and pull it off.

3. Remove the emergency emptying hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency emp- tying hose by turning it anticlockwise and pull it out.

The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several

times. To do this, close the emergency emptying hose temporarily with the plug.

Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose.

37

Image 37
Contents ÖKO-LAVAMAT 76640 update Pages of this instruction book Dear CustomerFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CProgramme option buttons Ment products are only effective at higher temperaturesWarm pre wash before the main washing cycle Shortened main wash cycle for lightly soiled washingConsumption data What does Update mean?Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration Loading the washing Opening and closing the doorSee Programme Tables for maximum loads Close the door firmlyAdd detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Programme progress display Washing Programme ProgressMulti-display Changing the washing programme Changing or cancelling the wash programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingCancelling the additional rinse function When the water is completely drainedAdditional Rinse RINSE+ Helpful to rinse with extra waterCancelling the child safety feature Child Safety FeatureWashing programme can be StartedInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Permanent ConnectionUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty conditionsPage Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG