7.Select the spin speed or Rinse Hold Option
Press the “Spin” button repeatedly, in order to select the desired spin speed or the Rinse Hold 
option. The relevant LED will light up.
If you select the Rinse Hold 
option, the machine will stop at the end of the programme with the water still in the tub.
EWF 12108W
EWF 14108W
9.Select the Delay Button
Before you start the programme if you wish the starting to be delayed, press the DELAY button. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.
During this period it is possible to load other laundry:
•Press “Start” button;
•load the laundry;
•close the door and press “Start” button again.
8.Select the desired option
Press the relevent button to select the required options. Depending on the selected programm, only certain options are available and shown during the selection phase.
Note: Not all the options are compatible with eachother. For the options that are not compatible, the icons will disappear.
10.Start the Programme
Press the “Start” button. The relevant LED will stop flashing. and only the LED relevant to the phase that is in progress will remain lit.
If you have chosen a delayed start, the washing machine will begin the countdown.
The display will show the duration of the programme or the selected delay.
11.How to change a programme during its cycle
You can alter the programme before it starts.
When the programme has started, you can only reset it by turning the programme selector dial to «Off» position and then you can select the new programme. Start it by pressing the “Start” button.
12.How to interrupt a programme during its cycle
Press the “Start” button to interrupt a programme which is running, the corresponding LED starts to flash. Press the same button again to restart the programme.
11