Hotpoint BHWD 129 manual Installation, Unpacking and levelling, Electric and water connections

Page 2

Installation

 

! Keep this instruction manual in a safe place for future

GB

reference. Should the appliance be sold, transferred or

 

 

moved, make sure the instruction manual accompanies

 

 

the Washer-dryer to inform the new owner as to its

 

operation and features.

 

! Read these instructions carefully: they contain vital

 

information on installation, use and safety.

 

Unpacking and levelling

 

Unpacking

 

1. Unpack the Washer-dryer.

 

2. Check whether the Washer-dryer has been damaged

 

during transport. If this is the case, do not install it

 

and contact your retailer.

3. Remove the 4 pro-

tective screws and the

rubber bush with the

respective spacer, situa- ted on the rear of the

appliance (see also the installation leaflet).

NB:The plastic spacers

may fall down inside the machine once the bolt has been removed, and

will not interfere with the operation of the machine.

4.Do not remove external bar.

5.Seal the gaps using the plastic plugs provided.

6.Keep all the parts: you will need them again if the Washer-dryer needs to be moved to another location.

!Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if the two front feet have not been adjusted correctly.

1.Install the Washer-dryer on a flat sturdy floor, wi- thout resting it up against walls, furniture cabinets or other.

2. If the floor is not per- fectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured ac- cording to the worktop, must not exceed 2°.

Levelling your appliance correctly will provide it with stability and avoid any vibrations, noise and shifting du- ring operation. If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the Washer-dryer.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply pipe by screwing it to a cold water tab using a

3/4 gas threaded connec- tion (see figure).

Before performing the connection, allow the wa- ter to run freely until it is perfectly clear.

2. Connect the other end of the water inlet hose to the Washer-dryer, screwing it onto the ap- pliance’s cold water inlet, situated on the top right- hand side on the rear of the appliance (see figure).

3. Make sure there are no kinks or bends in the hose.

!The water pressure at the tap must be within the values indicated in the Technical details table (on the next page).

!If the water inlet hose is not long enough, contact a specialist store or an authorised serviceman.

!Ensure that the supply taps are allowing water throu- gh. Old taps may seize in the closed position and thus prevent water reaching the machine.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Instructions for use WASHER-DRYERElectric and water connections InstallationUnpacking and levelling Blue 65 100 cmEarth Brown LiveFirst wash cycle Blue Neutral N Brown Live L Green & Yellow Earth ETechnical data Door Mounting Accessories Fig Instructions for the fitterUsing the Drilling Template Description of the Washer-dryer and starting a wash cycle Wash Cycle Progress indicatorStandby mode Control panelDoor locked indicator light Indicator lightsWash cycle phase indicator lights Starting a wash cycleReady to Wear Wash cyclesTable of wash cycles Personalisation Setting the temperatureSetting the drying cycle FunctionsGarments requiring special care Detergents and laundryDetergent dispenser drawer Preparing the laundryDisposal Precautions and tipsGeneral safety Opening the porthole door manuallyCleaning the pump Care and maintenanceCleaning the Washer-dryer Cutting off the water and electricity sup- GB pliesPossible causes / Solutions TroubleshootingProblem Machine smells Machine door cannot be opened Machine wont spin properlyMachine leaks from the dispenser GuaranteeGB AssistanceAfter Sales Service Page 195085379.01

BHWD 129 specifications

The Hotpoint BHWD 129 is a versatile and efficient washer-dryer combo designed to meet the needs of modern households. With its sleek design and array of advanced features, this appliance stands out as a practical solution for individuals and families looking to save space without compromising on performance.

One of the key features of the Hotpoint BHWD 129 is its generous load capacity. This model can handle up to 6 kg of laundry in the washing cycle and 5 kg in the drying cycle, making it suitable for small to medium-sized households. The combination of washing and drying in one unit allows users to streamline their laundry routine, saving time and effort.

In terms of technology, the Hotpoint BHWD 129 is equipped with an Eco cycle, which optimizes water and energy usage, making it an environmentally friendly choice. The machine also features a range of wash programs tailored to different fabric types and laundry needs. From quick washes for those in a hurry to more intensive cycles for heavily soiled items, the machine offers flexibility to cater to various laundry requirements.

Another notable characteristic of the Hotpoint BHWD 129 is its Spin Cycle performance. With a maximum spin speed of 1200 RPM, it effectively removes excess water from clothing, reducing drying times significantly. This feature is particularly advantageous for those using the drying function, as it allows laundry to dry more quickly and efficiently.

The appliance also includes a range of temperature settings, enabling users to customize the washing process according to the specific needs of their fabrics. The intuitive control panel ensures that selecting the right program is straightforward, making it user-friendly for individuals of all skill levels.

In addition, the Hotpoint BHWD 129 incorporates advanced noise reduction technology, allowing for quieter operation. This makes it a suitable choice for apartments or homes where noise levels should be kept to a minimum. The design also ensures that maintenance is easy, allowing users to keep the machine in top condition with minimal effort.

Overall, the Hotpoint BHWD 129 is an excellent choice for those seeking a compact, efficient, and multifunctional washer-dryer combo. Its combination of advanced features, user-friendly design, and eco-conscious technology makes it a valuable addition to any laundry room. Whether you have a busy family or are living single, this machine offers the reliability and performance necessary to make laundry day a breeze.
Top Page Image Contents