65 100 cm | Hotpoint WDUD specs

Connecting the drain hose

	• the supply voltage is included within the values indica-	GB
	ted on the Technical Data Plate fixed on the machine.	GB
	ted on the Technical Data Plate fixed on the machine.

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washer-dryer’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connec- ting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through parti- tions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere rewireable plug bearing the BSI mark of approval.

or:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length. Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machi- ne to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the appli- cable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Technical Data Plate fixed on the machine;

the mains cable is wired directly into a 13 amp cable out- let, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	Earth
Blue	Neutral
Brown	Live

WDUD specifications

The Hotpoint WDUD series is a versatile and innovative range of washer-dryer machines designed to meet the needs of modern households. This appliance merges the capabilities of both washing and drying into one compact unit, making it highly convenient for those with limited space.

One of the standout features of the Hotpoint WDUD is its impressive energy efficiency. The model is engineered to meet high energy standards, providing users with the benefit of reduced utility bills while still delivering reliable performance. The machine incorporates an intelligent sensor that automatically adjusts cycle times in response to load size, ensuring optimal energy consumption.

In terms of capacity, the Hotpoint WDUD can handle laundry loads of up to 7 kg for washing and 5 kg for drying. This makes it suitable for smaller families or apartments where space is at a premium. The intuitive design allows users to easily switch between washing and drying modes, streamlining the laundry process.

The model features a variety of washing programs tailored to meet the specific needs of different fabrics. Whether you're dealing with delicate items, everyday cottons, or heavily soiled garments, the Hotpoint WDUD offers dedicated cycles that ensure your clothes are treated with care. Additionally, the machine is equipped with a rapid wash option, enabling users to clean lightly soiled items in a fraction of the usual time.

Hotpoint has also integrated advanced technologies into the WDUD series, such as the 'Anti-Stain' technology. This works by intelligently controlling the temperature and timing of the wash to tackle and eliminate common stains without the need for pre-treatment. The 'Fresh Care' option keeps laundry tumbling gently in the drum after the cycle has finished, preventing unpleasant odors and ensuring clothes remain fresh until you’re ready to unload them.

Furthermore, the Hotpoint WDUD is designed with ease of use in mind. The user-friendly control panel and clear display make selecting the desired cycle simple, even for those less technologically inclined. There is also an eco-friendly option that allows users to keep their environmental impact low while still achieving impeccable cleaning results.

In summary, the Hotpoint WDUD series is a blend of convenience, efficiency, and cutting-edge technology, making it a smart choice for anyone looking to enhance their laundry experience. Its compact design, various washing programs, energy efficiency, and advanced stain removal capabilities position the Hotpoint WDUD as an essential appliance for modern living.