Troubleshooting, Problem | Hotpoint WDL 520 P/G/A/K specs

Troubleshooting

Your Washer-dryer could fail to work. Before contacting the Technical Assistance Centre

(see “Assistance”), make sure that the problem cannot be not solved easily using the following list.	GB

Problem:

The Washer-dryer does not switch on.

The wash cycle does not start.

Possible causes / Solutions:

•The appliance is not plugged into the socket fully, or is not making contact.

•There is no power in the house.

•The Washer-dryer door is not closed properly.

•The ON/OFF button has not been pressed.

•The START/PAUSE button has not been pressed.

•The water tap has not been opened.

The Washer-dryer does not			• The water inlet hose is not connected to the tap.
take in water (the indicator			• The hose is bent.
light for the first wash cycle			• The water tap has not been opened.
stage flashes rapidly).			• There is no water supply in the house.
			• The pressure is too low.
			• The START/PAUSE button has not been pressed.
The Washer-dryer continuously			• The drain hose is not fitted at a height between 65 and 100 cm from the
takes in and drains		water.	floor (see “Installation”).
			• The free end of the hose is under water (see “Installation”).
			• The wall drainage system is not fitted with a breather pipe.
			If the problem persists even after these checks, turn off the water tap,
			switch the appliance off and contact the Assistance Service. If the
			dwelling is on one of the upper floors of a building, there may be problems
			relating to water drainage, causing the Washer-dryer to fill with water
			and drain continuously. Special anti-draining valves are available in shops
			and help to avoid this inconvenience.
The Washer-dryer does not			• The wash cycle does not include draining: some wash cycles require the
drain or spin.			drain phase to be started manually.
			• The ANTI CREASE function has been activated: To complete the wash
			cycle, press the START/PAUSE button (“Personalisation”).
			• The drain hose is bent (see “Installation”).
			• The drainage duct is clogged.
The Washer-dryer vibrates a			• The drum was not unlocked correctly during installation (see “Installation”).
lot	during the spin	cycle.	• The Washer-dryer is not level (see “Installation”).
			• The Washer-dryer is trapped between cabinets and walls (see “Installation”).
The	Washer-dryer	leaks.	• The water inlet hose is not screwed on properly (see “Installation”).
			• The detergent dispenser drawer is blocked (for cleaning instructions, see
			“Care and maintenance”).
			• The drain hose is not fixed properly (see “Installation”).

The START/PAUSE indicator light (orange) and the function indicator lights flash rapidly.

There is too much foam.

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again.

If the problem persists, contact the Technical Assistance Service.

•The detergent is not suitable for machine washing (it should display the text “for Washer” or “hand and machine wash”, or the like).

•Too much detergent was used.

The washer-dryer does not dry. • The appliance is not plugged into the socket, or not enough to make contact.

•There has been a power failure.

•The appliance door is not shut properly.

•The DRYING knob is on the setting.

WDL 520 P/G/A/K specifications

The Hotpoint WDL 520 P/G/A/K is a versatile washer-dryer designed to meet the demands of modern households. This advanced appliance combines cutting-edge technology with user-friendly features, making laundry day more efficient and convenient.

One of the standout features of the Hotpoint WDL 520 is its large capacity, accommodating up to 6 kg for washing and 5 kg for drying. This balance allows users to wash and dry substantial loads in one go, reducing the need for multiple cycles and saving time. Additionally, the appliance operates with a maximum spin speed of 1200 RPM, ensuring clothes come out drier and requiring less time in the dryer.

The WDL 520 is equipped with various wash programs, catering to different fabric types and levels of dirtiness. With options such as Cotton, Synthetics, and Delicates, this washer-dryer provides the utmost care for clothing, ensuring that each load is treated appropriately. The Eco Wash program is designed to minimize water and energy consumption, making it an environmentally friendly choice that doesn’t sacrifice performance.

In terms of technology, the Hotpoint WDL 520 features the innovative Anti-Stain technology. This unique system targets and removes stubborn stains effectively by using a combination of temperature, drum motion, and soaking time. As a result, users can confidently tackle common stains without the need for pre-treatment.

Another notable feature is the Delay Timer, which allows users to set the machine to start at a more convenient time. This function can be particularly useful for those who want to take advantage of off-peak energy rates or ensure that laundry finishes at a specific time.

The intuitive digital display and straightforward controls make operation simple, allowing users to easily navigate through cycles and settings. Moreover, the appliance is designed with a user-friendly interface that includes a variety of indicators, making it easy to monitor the progress of each wash and dry cycle.

Safety is also a priority with the Hotpoint WDL 520, incorporating features such as child lock and overflow protection to provide peace of mind.

Overall, the Hotpoint WDL 520 P/G/A/K is an excellent choice for individuals and families looking for a reliable washer-dryer. Its combination of practical features, advanced technology, and energy efficiency make it a valuable addition to any home, streamlining the laundry process and ensuring optimal care for garments.