Connecting the drain hose

_the supply voltage is included within the values

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

The drain hose may be connected to an under- sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

indicated on the Technical details table	GB
indicated on the Technical details table
(see page 5);

_the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self - syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

_the socket is earthed and in compliance with the applicable law;

_the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

B l u e	Neutral
B r o w n	L i v e

WDL 520 P/G/A/K specifications

The Hotpoint WDL 520 P/G/A/K is a versatile washer-dryer designed to meet the demands of modern households. This advanced appliance combines cutting-edge technology with user-friendly features, making laundry day more efficient and convenient.

One of the standout features of the Hotpoint WDL 520 is its large capacity, accommodating up to 6 kg for washing and 5 kg for drying. This balance allows users to wash and dry substantial loads in one go, reducing the need for multiple cycles and saving time. Additionally, the appliance operates with a maximum spin speed of 1200 RPM, ensuring clothes come out drier and requiring less time in the dryer.

The WDL 520 is equipped with various wash programs, catering to different fabric types and levels of dirtiness. With options such as Cotton, Synthetics, and Delicates, this washer-dryer provides the utmost care for clothing, ensuring that each load is treated appropriately. The Eco Wash program is designed to minimize water and energy consumption, making it an environmentally friendly choice that doesn’t sacrifice performance.

In terms of technology, the Hotpoint WDL 520 features the innovative Anti-Stain technology. This unique system targets and removes stubborn stains effectively by using a combination of temperature, drum motion, and soaking time. As a result, users can confidently tackle common stains without the need for pre-treatment.

Another notable feature is the Delay Timer, which allows users to set the machine to start at a more convenient time. This function can be particularly useful for those who want to take advantage of off-peak energy rates or ensure that laundry finishes at a specific time.

The intuitive digital display and straightforward controls make operation simple, allowing users to easily navigate through cycles and settings. Moreover, the appliance is designed with a user-friendly interface that includes a variety of indicators, making it easy to monitor the progress of each wash and dry cycle.

Safety is also a priority with the Hotpoint WDL 520, incorporating features such as child lock and overflow protection to provide peace of mind.

Overall, the Hotpoint WDL 520 P/G/A/K is an excellent choice for individuals and families looking for a reliable washer-dryer. Its combination of practical features, advanced technology, and energy efficiency make it a valuable addition to any home, streamlining the laundry process and ensuring optimal care for garments.