Preset Programs, Making Temporary Program Changes

THE PRESET PROGRAMS

P 1 P 2

P 3

P 4

ASKO washers are delivered preset with four commonly

to “Customizing the Preset Program Buttons” below.

used programs. The table below lists the preset

Remember, you can temporarily adjust the temperature

programs and the settings for each. To select a

setting and spin speed for a preset program. (See

program, simply press one of the program buttons and

“Making Temporary Program Changes” below.)

press Start. For additional programming options, refer

PRESET PROGRAMS

Preset

Wash

Spin

# of

Program

Wash Cycle

Types of Laundry

Temp(1)

Speed (1)(2)(3)

Rinses

Spins

Light wash

Normally soiled loads

140° F

1600

rpm

Light wash

Normally soiled perm press

105° F

1600

rpm

Quick wash

Lightly soiled fabrics

105° F

1600

rpm

Hand wash

Washable silks, nylon, etc.

85° F

800 rpm

NOTES: (1) You can temporarily adjust the temperature and spin speed settings. (See “Making Temporary Program Changes” below.)

(2)The spin speeds in the preset programs are the maximum speed settings for these specific wash programs.

(3)Model W6641 has a maximum spin speed of 1400 rpm.

WARNING! Some fabrics may not be able to withstand extremely hot temperatures. Please refer to the “Recommended Wash Temperatures” section on page 6.

ENGLISH

MAKING TEMPORARY PROGRAM CHANGES

You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset program you want to use then follow the instructions at right. The settings will revert to normal at the end of the program.

Temperature – Press until the desired temperature displays in the LCD window. (The options are 85°, 105°, 120°, 140°, 160°, 175°, and 205°.) If you also want to change the spin speed, read the following paragraph; otherwise, press Start.

Spin Speed – Press until the desired spin speed displays in the LCD window then press Start. (The spin speeds advance in 200 rpm increments.)

CUSTOMIZING THE PRESET PROGRAM BUTTONS

ASKO’s EasyControl™ panel makes it simple to customize the preset programs to perfectly fit your laundry needs. You needn’t worry about making an error because you can easily restore the original program settings.

In addition to the preset programs listed above, you can customize the preset buttons to use any of the programs listed in the table below.

This table also lists the pre-programmed settings for each program. For example, if you select Perma Press on the program menu, it is automatically programmed to wash at 105° F using a normal wash action, rinse three times then do a short spin, then rinse two more times, do a long spin and drain. You can modify some of these settings (see “Wash Program Options” on page 14).

AVAILABLE PROGRAMS

								Spin
	Pre-	Main	Wash	Temp.	#	Int.	Final	Speed	Load
Program	wash	Wash	Action	(° F)	Rinses	Spin	Spin	(1)	Size

Heavy wash	yes	Long	Normal	140	5	2	Long	1600	Full
Normal wash	no	Long	Normal	140	5	2	Long	1600	Full
Light wash	no	Short	Normal	140	5	2	Long	1600	Full
Synthetic wash	no	Short	Normal	105	3	no	Short	800	Half
Quick wash	no	Short	Normal	105	3	no	Long	1600	Full
Super quick wash	no	Short	Normal	105	2	no	Short	800	Half
Wool wash	no	Short	Gentle	85	3	no	Short	800	Third
Hand wash	no	Short	Gentle	85	3	no	Short	800	Third
Rinse	n/a	n/a	n/a	n/a	1	n/a	Long	1600	Full
Spin	n/a	n/a	n/a	n/a	n/a	n/a	Long	1600	Full
Drain	n/a	n/a	n/a	n/a	n/a	n/a	n/a	n/a	Full
NOTE:	(1) Model W6641 has a maximum spin speed of 1400 rpm.

Page 13