Spin Speed
This lets you set the spin speed. The spin speeds advance in 200 rpm increments. Only the spin speeds available for the wash program you selected will display. (See chart on page 14.)
1. Press MENU until “Select spin speed” displays.
2.Use the Arrow buttons to raise or lower the spin speed setting.
3.When the spin speed you prefer displays, press ENTER. The LCD will display the new spin speed.
4.Press ENTER again to permanently save your program setting.
Delayed Start
This lets you set a delayed start from 1 to 24 hours. This means you can set the washer to start at the most convenient time for you, such as an hour before you arrive home from work. This feature is also useful in areas where utility companies offer discount rates during
1.Press MENU until “Select time for delayed start” displays.
2.Use the Arrow buttons to increase or decrease the delay time. (The numbers indicate hours.)
3.When the number of hours you want to delay starting the machine displays, press ENTER. The LCD will display the delay start time.
4.Press ENTER again to permanently save your program setting.
Selecting Options
This lets you select Super Rinse, ECO (Economy), Pre- soak,
1.Press MENU until “Select options” displays.
2.Continue to press MENU to scroll through the options.
3.When the option you wish to select displays, press an Arrow to toggle between Off and On.
4.Press ENTER. The LCD will display the new setting.
5.Press ENTER again to permanently save your setting.
RESTORING A PRESET
PROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you want to restore and hold it down while your press ENTER.
The program will revert to its original settings.
NOTE: If you change the P3 program then decide to restore its original settings, after pressing P3 and ENTER, you must go into the Options menu (see page 14) and turn off Short Spin.
CHANGING THE LANGUAGE ON THE LCD WINDOW
There are eleven languages available for the LCD window:
♦ | English | ♦ | Swedish |
♦ | French | ♦ | Danish |
♦ | Spanish | ♦ | Norwegian |
♦ | Portuguese | ♦ | Netherlands |
♦ | Italian | ♦ | Finnish |
♦ | German |
|
|
To change the language, follow the steps below:
1.Turn the machine off then on again.
2.Press ENTER five times in succession then press P1 five times. (This must be done within 15 seconds.)
3.When the Language menu displays, press 
to advance to the desired language.
4.Once the correct language displays, press ENTER to program the LCD window to display the language you selected.
5.Press ENTER again to permanently save your program setting.
CHANGING THE TEMPERATURE READOUT ON THELCD WINDOW FROM CELSIUS TO FAHRENHEIT
You can change the temperature readout on the LCD window from Celsius to Fahrenheit and vice versa. To do this follow the steps below:
1.Turn the machine off then on again.
2.Press ENTER five times in succession then press P2 five times. (This must be done within 15 seconds.)
3.When the Temperature menu displays, press an Arrow button to toggle between Fahrenheit and Celsius.
4.When your preference displays, press ENTER to program the LCD window to display the temperature reading you selected.
Page 16