Noisy Feet have not been | AEG 16810 guide

AEG 16810 manual Noisy Feet have not been

Page 39

		Something not working?


Problem	Possible cause	Solution

	The transit bolts have	Check that the machine
	not been removed.	has been unpacked as
		described in the Installation
The machine vibrates or is		section.
The machine vibrates or is
noisy	The feet have not been	Carefully level the machine.
	adjusted.
	There is little laundry in	Correct operation of the
	the drum.	machine is not affected.

	The programme is still	Wait until the end of the
	running and the drum	programme before opening
	is turning.	the door.
	The water level is above the	Before opening the door,
The door will not open	bottom edge of the door.	the water must be emptied
		out.
	The machine is heating the	Wait until the end of the
	water or drying the	heating or drying phase.
	clothes.

Image 39

Contents

Lavamat Turbo Dear customer Contents Page Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonStain Electronic Drying buttonDrying Time button Programme Option buttonsPrewash SoakProgramme progress display DisplayCancelling a programme Altering a programme which is runningOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates 40 Detergents and additives Sort of laundry Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time or degree of dryingHow to dry Additional dryingDrying only Rated load How to wash Load the laundryAdd detergent and additive Selection of the spin speed or Rinse Hold option Selection of the desired optionsBefore starting Selection of the Extra Rinse optionAt the end of the programme Starting the programmeNON-STOP programme Automatic washing and dryingWash programmes Programme chartTion Special programmesDescrip Consumption1600 Timed DryingDegree of drying Rated load Spin speed Drying time MinsMinutes Consumption data for timed dryingRated Water Energy Duration LitresDetergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each wash Door seal Drain filter Water inlet filter Emergency emptying out Frost precautionsTroubleshooting Problem Possible cause SolutionSomething not working? Possible cause Solution ProblemNoisy Feet have not been E10 Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationPositioning LevellingWater inlet Water drainage Electrical connectionConnect the machine to an earthed socket Permanent connection Made in ECC

Related manuals

AEG 16810 manual Noisy Feet have not been

Problem

noisy

The feet have not been