Description of the appliance
When the programme has finished, if the OVERDOSAGE 
light comes on, it indicates that too much detergent has been used or that the drain filter is blocked.
Cancelling a programme
To cancel a programme which is running, turn the programme selector dial to the OFF position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD 
option), turn the selector dial first to OFF and
then to the DRAIN programme 
.
Altering a programme which is running
To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.
Any function can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE 
button again to
To modify the selected programme turn the programme selector dial to O and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but- ton again the machine restarts with the newly selected programme.
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the START/PAUSE button.
The door can be opened if:
•the machine is not already heating or drying;
•the water level is not above the bottom edge of the door;
•the drum is not turning.
The light 
on the control panel indicates if the door can be opened:
•green light: the door can be opened;
•unlit light: the door cannot be opened;
•flashing red light: the door is open.
16