AEG 16810 manual Instructions for installation and electrical connection

Page 44

Instructions for installation and electrical connection

Safety instructions for the installer

This appliance is heavy, care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.

Any electrical work required to install this appliance must be carried out by a qualified electrician.

Any plumbing work required to install this appliance must be carried out by a qualified plumber.

After having installed the machine, check that it is not standing on its electrical supply cable.

If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

The installation should comply with local water authority and build- ing regulations requirements.

Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

44

Image 44
Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelay Start button START/PAUSE buttonElectronic Drying button Drying Time buttonProgramme Option buttons StainSoak PrewashDisplay Programme progress displayOpening the door after the programme has started Cancelling a programmeAltering a programme which is running Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton SyntheticsDelicates 40 Detergents and additives Preparing the drying cycle LoadGarments not suitable for drying Sort of laundryDrying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residueDrying only Rated load How to dryAdditional drying Add detergent and additive How to washLoad the laundry Selection of the desired options Selection of the spin speed or Rinse Hold optionSelection of the Extra Rinse option Before startingStarting the programme At the end of the programmeAutomatic washing and drying NON-STOP programmeProgramme chart Wash programmesSpecial programmes DescripConsumption TionTimed Drying Degree of dryingRated load Spin speed Drying time Mins 1600Consumption data for timed drying Rated Water Energy DurationLitres MinutesCleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerWater inlet filter Door sealDrain filter Frost precautions Emergency emptying outSomething not working? TroubleshootingProblem Possible cause Solution Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingWater inlet PositioningLevelling Connect the machine to an earthed socket Water drainageElectrical connection Permanent connection Made in ECC
Related manuals
Manual 100 pages 7.84 Kb