AEG 16810 manual Installation, Unpacking

Page 46

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

025

Remove the poly- styrene block from the bottom of the machine and release the two plastic bags which are fixed under the filter door.

2 1

Carefully remove the

right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine.

Set the machine upright and remove the two remaining bolts from the back.

Pull out the three plastic spacers from the holes into which

the bolts were fit-

ted.

Plug the open holes with the plugs which you will find in the

plastic bag containing the instruction booklet.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

46

Image 46

Contents Lavamat Turbo Dear customer Contents Page Contents Technical data Service Positioning, connection, starting up Safety instructionsGeneral safety Follow the instructions for positioning and connectionChild safety Proper usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelay Start button START/PAUSE buttonProgramme Option buttons Electronic Drying buttonDrying Time button StainSoak PrewashDisplay Programme progress displayAltering a programme which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Garments not suitable for drying Preparing the drying cycleLoad Sort of laundryModification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueAdditional drying How to dryDrying only Rated load Load the laundry How to washAdd detergent and additive Selection of the desired options Selection of the spin speed or Rinse Hold optionSelection of the Extra Rinse option Before startingStarting the programme At the end of the programmeAutomatic washing and drying NON-STOP programmeProgramme chart Wash programmesConsumption Special programmesDescrip TionRated load Spin speed Drying time Mins Timed DryingDegree of drying 1600Litres Consumption data for timed dryingRated Water Energy Duration MinutesAfter each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawerDrain filter Door sealWater inlet filter Frost precautions Emergency emptying outProblem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionNoisy Feet have not been Problem Possible cause E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingLevelling PositioningWater inlet Electrical connection Water drainageConnect the machine to an earthed socket Permanent connection Made in ECC

Related manuals

Manual 100 pages 7.84 Kb