AEG 12700 manual Preparing the drying cycle

Page 12

Preparing the drying cycle

As a dryer, the machine works on the condensation principle.

Therefore, the water tap must be open and the drain hose must drain water into a sink or into the drain pipe, even during the dry- ing cycle.

Load

 

Sort of laundry

 

max. load

 

 

(dry weight)

 

 

 

 

 

 

 

 

 

 

 

Linen and cottons

 

 

2.5 kg

 

 

 

 

Synthetics

 

 

2 kg

 

 

 

 

Warning:

Loads of washed laundry exceeding these values must be divided before being dried, otherwise poor results will be obtained.

Garments not suitable for drying

Particularly delicate items such as synthetic curtains, woollen and silk, garments with metal inserts, nylon stockings, bulky garments such as anoraks, bedcovers, quilts, sleeping bags and duvets must not be machine dried.

Garments padded with foam-rubber or materials similar to foam- rubber must not be machine dried; they represent a fire hazard.

Also, fabrics containing residues of setting lotions or hair sprays, nail solvents or similar solutions must not be machine dried in order to avoid the formation of harmful vapours.

Preparing the drying cycle

Drying symbols on garment labels

Always look at the garment label to check whether garments can be machine dried.

The following symbols refer to drying:

Machine drying is usually possible

Normal drying (normal temperature)

Gentle drying (reduced temperature)

Do not machine dry

Duration of the drying cycle

The drying time can vary according to

the final spin speed;

the required degree of drying (store dry or iron dry);

the type of laundry;

the size of load.

The usual drying times are indicated in the programme chart. As you become more familiar with the appliance, you will discover the drying times that best suit your needs according to the various type of fabric. It is a good idea to make a note of these times.

Modification of the drying time

If you wish to modify the drying time when a drying programme is running, first depress START/PAUSE button to set the machine to PAUSE. After mod- ifying the time, depress START/PAUSE again to continue the pro- gramme.

Fibre residue

After drying fluffy fabrics, such as new towels, it is advisable to perform the RINSE programme “A” to be sure that any residue that may remain in the tub is completely removed and does not stick to garments dried afterwards.

After each drying cycle the filter should be checked and cleaned.

22

23

Image 12
Contents ÖKO-LAVAMAT 12700 Turbo Electronic Contents Page Safety instructions General safetyChild safety Positioning, connection, starting upMain features of your washer-dryer DisposalTips for environmental protection Packaging materialsDescription of the appliance Control panel Front viewDelay Start button START/PAUSE buttonDrying Time button Programme Option buttonsDisplay Programme progress displayThetics and wool 900 rpm and for delicates 700 rpm Cancelling a programme Detergent dispenser drawerBefore the first wash Altering a programme which is runningPreparing the wash cycle Sorting out and preparing the laundryTypes of fabric and care labels Detergents and additives Preparing the drying cycle How to dry How to washSelection of the Delay Start option Selection of the desired wash programmeSelection of the spin speed or Rinse Hold option Relevant button the light corresponding toAutomatic washing and drying Starting the programmeNON-STOP programme Programme progress display At the end of the programmeProgramme chart Wash programmesSpecial programmes Consumption data for drying DryingCleaning and maintenance Frost precautions TroubleshootingProblem Possible cause Solution Something not working?Problem Possible cause SolutionUnsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data ServiceWater pressure 50-800 kPa This appliance complies with the following EC directivesDimensions of the appliance Rear viewDoubt, do not use it and contact the retailer Installation UnpackingPositioning LevellingWater inlet Water drainageElectrical connection Permanent connection