AEG 12700 Display, Programme progress display, Thetics and wool 900 rpm and for delicates 700 rpm

Page 8

Description of the appliance

PREWASH

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates.

This option is not available with the wool programme and cannot be used with SOAK and STAINS .

For use when washing heavily soiled laundry.

Important: By depressing at the same time buttons and the machine will perform an extra rinse (see page 27)

SPIN SPEED

Press this button to reduce the maximum speed of the final speed

1200

proposed by the machine for the selected programme or to select

1000900

Description of the appliance

Display

The display shows the following information:

Duration of the selected programme (in minutes), calculated auto- matically on the basis of the maximum recommended load for each type of fabric.

Selected drying time (max. 130 minutes for cotton, 100 minutes for synthetics).

After the programme has started, the time remaining is updated every minute.

When the programme has finished, a steadily lit zero is displayed.

Delayed start, (19 hours max.) programmed using the special button

. The countdown is updated every hour.

Alarm code indicating a fault in the machine operation (see page 37).

option

(RINSE HOLD).

700

The maximum spin speed for cotton is 1200 rpm, for syn-

400

thetics and wool 900 rpm and for delicates 700 rpm.

 

RINSE HOLD

By selecting this option, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished,

the pilot light (END) on the programme progress display illuminates to indicate that the water must be emptied out.

To empty out water:

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the DRAIN programme “C” to empty out the water without spinning.

Warning! The programme selector dial must be turned first to RESET O and then to the DRAIN programme “C”.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

The RINSE HOLD option cannot be selected for the automatic WASHING & DRYING programme.

Programme progress display

By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the pro- gramme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.

PREWASH

MAIN WASH

RINSES EXTRA RINSE

SPIN

DRYING

END

14

15

Image 8
Contents ÖKO-LAVAMAT 12700 Turbo Electronic Contents Page Safety instructions General safetyChild safety Positioning, connection, starting upMain features of your washer-dryer DisposalTips for environmental protection Packaging materialsDescription of the appliance Control panel Front viewDelay Start button START/PAUSE buttonDrying Time button Programme Option buttonsThetics and wool 900 rpm and for delicates 700 rpm DisplayProgramme progress display Cancelling a programme Detergent dispenser drawerBefore the first wash Altering a programme which is runningTypes of fabric and care labels Preparing the wash cycleSorting out and preparing the laundry Detergents and additives Preparing the drying cycle How to dry How to washSelection of the Delay Start option Selection of the desired wash programmeSelection of the spin speed or Rinse Hold option Relevant button the light corresponding toAutomatic washing and drying Starting the programmeNON-STOP programme Programme progress display At the end of the programmeSpecial programmes Programme chartWash programmes Consumption data for drying DryingCleaning and maintenance Frost precautions TroubleshootingProblem Possible cause Solution Something not working?Problem Possible cause SolutionUnsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data ServiceWater pressure 50-800 kPa This appliance complies with the following EC directivesDoubt, do not use it and contact the retailer Dimensions of the applianceRear view Installation UnpackingPositioning LevellingWater inlet Water drainageElectrical connection Permanent connection