English
Filter
There are two lint filters in this washer as shown below.
First one is located inside the washer tub. There is a small nylon bag that will collect lint and residue from dirty clothes during the wash cycle.
You must clean this lint filter after every load for the best results. Pull up the filter to remove. Clean and slide back the filter to replace.
The second one is located at the inner shaft of the agitator under the fabric softener dispenser.
Remove inner shaft of the agitator out to clean the filter. You will see that filter is located at the bottom of the shaft. The small nylon bag at the bottom of the shaft will collect lint and residue from dirty clothes during the wash cycle.
You must also clean this filter after every load for the best results. Press both sides of filter clips to detach from the shaft. Clean and snap the filter clips on to the shaft to attach it back.
(lint filter)
Note: Do not wash your clothes without filters in their compartments inside the tub.
9