Programmes for synthetics and wool
Maximum loads : 2,5 kg (synthetics), 1 kg (wool).
| Programme | Temperatures | Descriptions | Consumptions* | |||
Programmes |
|
|
| ||||
descriptions | °C | of the cycle | Water | Energy | Time | ||
| |||||||
|
|
|
| ||||
|
|
|
| (l) | (kWh) | (min) | |
H
|
| Prewash |
|
|
| |
Synthetics + | 60° | Wash to 60° | 72 | 1,2 | 85 | |
3 rinsings | ||||||
|
|
|
|
|
Rinse hold
J
Synthetics | 60° | Wash to 60° | 58 | 1,1 | 75 |
3 rinsings | |||||
|
| Rinse hold |
|
|
|
Quick programme | 40° | Wash to 40° | 58 | 0,6 | 55 |
3 rinsings | |||||
|
| Rinse hold |
|
|
|
L
Wool | 40° | Wash to 40° | 63 | 0,45 | 45 |
3 rinsings | |||||
|
| Rinse hold |
|
|
|
M
Rinsings | 3 rinsings | 42 | 0,01 | 20 | |
Rinse hold | |||||
|
|
|
|
N
Drain | Drain | 0 | 0,002 | 5 |
*These consumptions given (with the hightest temperature) in the above table are provided as a guide and may vary depending on the water supply temperature and pressure, and your electricity power supply mains voltage.
If the rinse hold pushbutton is selected, the synthetics and wool programmes end by a rinse hold in order to prevent the formation of creases. The control lamp keeps lighted. You can finish these programmes by a draining (by depressing the rinse hold pushbutton) or by a spinning (by depressing the on/off pushbutton " 
" and by choosing the programme G).
BE CAREFUL :
THE LID CAN ONLY BE OPENED 90 SECONDS AFTER THE MACHINE HAS STOPPED.
30