Zanussi T 503 manual If Something Doesnt Work ?

IF SOMETHING DOESN'T WORK ?

Problems		Solutions
The wash results are not as usual	Check that :
		was the wrong quantity or the wrong detergent
	added ? Insufficient detergent leads to grey washes
	and scale deposits in the machine. Check the
	quantities more exactly.
		were special stains pre-treated ?
		were programme and temperature correctly
	chosen ?
The washing cycle is very much too long.	Check that :
		the water pression is sufficient.
		the pump filter is not obstructed.
The washing machine stops during a		there has not been a power breakdown.
	Check that :
washing cycle.		the water pression is sufficient.
		the pump filter is not obstructed.
		the mains fuse is intact.
		there is not a rinse hold ending a washing
		programme (see the programmes chart pages 29
		and 30).
The machine does not start up	Check that :
		the mains fuse is intact.
		the appliance is plugged in,.
		the lid is firmly shut.
		the programme selector dial is correctly positioned.
		the beginning of the programme has been ordered
		(on/off pushbutton pushed on).
The machine does not drain and/or does		there has not been a power breakdown.
	Check that :
not spin		the drain hose is not squashed or bent.
The machine does not fill		the drain filter is not clogged.
	Check that :
		the inlet water hose is opened and the water
		pression is sufficent.
		the lid of the appliance is closed.
		there has not been a breakwater.

35