USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
2 1 3 4
1 ON/OFF pushbutton " 
"
Press the on/off pushbutton, the programme starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is working (on/off pushbutton " 
" pressed). It lights off when the cycle is finished (programme selector on a stop position "I").
3 Cold pushbutton "
"
This pushbutton allows to wash laundry with cold water on all programmes. The water coming into the tub is not heated.
5
5 Programme selector
It enables to select the most adapted programme to the nature and degrees of soil of your laundry. Turn the programme selector clockwise to select the chosen programme.
The programme selector indicates each pro- gramme phase as it takes place.
At the end of the programme, the appliance stops automatically on a stop position "I" for all the programmes or on a rinse hold position " " for the synthetics and wool programmes if the rinse hold pushbutton "
" is selected.
Never turn the programme selector anticlockwise.
4 Rinse hold pushbutton "
"
Press this button to leave the water in the drum after the wash cycle is completed. This works only on synthetics, wool and delicate programmes. The clothes are left suspended in water after the final rinse to prevent the formation of creases.
You can end these programmes by a draining by depressing this pushbutton or select the pro- gramme G for a spinning phase (with the on/off pushbutton "
" pressed out).
26