Zanussi TCE 7127 W Installation Instructions, Technical Specifications, Unpacking, Positioning

Page 15

Installation Instructions

It is dangerous to alter the specifications or attempt to modify this product in any way.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Technical Specifications

DIMENSIONS

Height

 

85 cm (33.5”)

 

Width

 

60 cm (23.6”)

 

Depth

 

58 cm (22.8”)

 

 

 

 

POWER SUPPLY VOLTAGE

 

 

240 V/50 Hz

TOTAL POWER ADSORBED

 

 

2450 W (13A)

MAX LOAD CAPACITY

Cotton, linen

 

6.kg (13.2 lbs)

 

Synthetics

 

3 kg (06.6 lbs)

 

 

 

 

DRUM VOLUME

 

 

108 l

 

 

 

CONSUMPTIONS

Cotton, linen

3.36 kWh (6, kg store dry)

 

Cotton, linen

2.70 kWh

(6, kg iron dry)

 

Synthetics

1.20 kWh

(3 kg store dry)

 

 

 

 

This appliance complies with the following E.E.C. Directives:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Unpacking

Warning !

Slide out the polythene bag containing the polystyrene block before using the appliance.

Pull off adhesive strips from inside machine on top of drum

P1106

Should the appliance be moved, it must be transported vertically.

Positioning

It is recommended that, for your convenience, the machine is positioned close to your washing machine.

The tumble dryer must be installed in a clean place, where dirt does not build up.

Air must be able to circulate freely all round the appliance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine.

To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.

Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.

The feet must never be removed.

Do not restrict the floor clearance through deep- pile carpets, strips of wood or similar. This might cause heat build-up which would interfere with the operation of the appliance.

15

Image 15
Contents Tumble Dryer Installation Child SafetyUse Contents Interest Environment Your New Tumble DryerDescription of the Appliance Energy saving tipsControl Panel Programme/Time Selector Dial Load Programme ChartType of laundry Drying time Max-load Programme Fresh & CoolIf you open and then close the door before Corresponding to the phases making upDrying Remove the laundryDo not use the tumble dryer to dry the following Hints & Tips on DryingCare Labels you may find on your laundry Do not overload the applianceCleaning the condenser unit Maintenance and CleaningExternal cleaning Cleaning the filtersReservoir must be re-inserted correctly Cleaning the air intake grilleCleaning the drum Emptying the water reservoirService & Spare Parts Something Not Working0870 5 Exclusions Guarantee ConditionsEuropean guarantee Customer Care DepartmentTo access adjustment mode Adjusting the level of conductivityMemorizing the new setting Positioning Installation InstructionsTechnical Specifications UnpackingThis operation must be carried out by qualified personnel Door reversalElectrical connection Permanent connectionFrom the Electrolux Group. The world’s No choice