Zanussi TCE 7127 W manual Control Panel

Page 5

The Control Panel

1

2

3

4

5

6

7

1Programme Chart

This will help you to select the correct programme for drying.

2Low Temperature Button

Pressing this button allows drying to be performed at a lower temperature, for delicate items.

The corresponding pilot light comes on.

This option can also be used for time controlled drying.

The dryer heats at 1400 W instead of 2200 W.

If the button is not pressed, drying is performed at full power (2200 W).

This option cannot be selected with QUICK DRY .

3QUICK DRY Button

By depressing this button the drying time is reduced in the following COTTON programmes:

EXTRA DRY

READY TO WEAR

STORE DRY

The corresponding pilot light comes on. This option cannot be selected with LOW TEMPERATURE function.

4Buzzer OFF Button

A buzzer sounds by depressing the push buttons during the anti-creasing phase, at the end of programme and when the water reservoir is full. Press this button when selecting the programme if you wish to switch the buzzer off during the anti- creasing phase. The corresponding light illuminates.

5Start button

Press this button to start the dryer after having selected the programme and the options.

The relevant light will stop flashing. If you have chosen a delayed start, the machine will begin the countdown.

If the door of the appliance or the small door at the bottom is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted.

This button must be depressed also after a power failure and after having re-inserted the water reservoir, if it has been emptied in the middle of a programme after lighting up of light .

In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.

6Programme Phase Indicator Lights

These lights indicate the various phases of the programme as they are being performed.

“Drying” light

This light indicates that the appliance is in the drying phase.

“Cooling” light

This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.

“End of programme” light

This light is on at the end of the cooling phase, during the anti-creasing phase and at the end of the programme.

5

Image 5
Contents Tumble Dryer Use InstallationChild Safety Contents Description of the Appliance Your New Tumble DryerEnergy saving tips Interest EnvironmentControl Panel Programme/Time Selector Dial Type of laundry Drying time Max-load Programme Programme ChartFresh & Cool LoadDrying Corresponding to the phases making upRemove the laundry If you open and then close the door beforeCare Labels you may find on your laundry Hints & Tips on DryingDo not overload the appliance Do not use the tumble dryer to dry the followingExternal cleaning Maintenance and CleaningCleaning the filters Cleaning the condenser unitCleaning the drum Cleaning the air intake grilleEmptying the water reservoir Reservoir must be re-inserted correctly0870 5 Service & Spare PartsSomething Not Working European guarantee Guarantee ConditionsCustomer Care Department ExclusionsMemorizing the new setting To access adjustment modeAdjusting the level of conductivity Technical Specifications Installation InstructionsUnpacking PositioningElectrical connection Door reversalPermanent connection This operation must be carried out by qualified personnelFrom the Electrolux Group. The world’s No choice