Zanussi TCE 7276 W Duration of selected programme, End of programme, Incorrect option selection

Page 6

To cancel the delay time press the DELAY START button until the display indicates 0’. Then press the START/PAUSE button again.

When the delay is cancelled, the display shows the duration of the programme.

During the delayed start, it is not possible to change the programme or the delay time that have been selected. To do this, you must first switch off the machine by setting the programme selector dial to “0”. Select the new programme, the options and the delayed start, then press the START/PAUSE button.

To cancel or change options that have been selected, simply set the appliance to PAUSE. Once you perform the desired operation, press once again the START/PAUSE button.

If you wish to add more laundry while the machine is performing the countdown, simply open the door. When you close the door, press the START/PAUSE button again to cause the countdown to be resumed.

7 DISPLAY

The display shows the following information:

duration of selected programme

delayed start

end of programme

incorrect option selection

alarm code

Duration of selected programme

After you have selected the programme, its duration (in hours and minutes) appears on the display. It is calculated automatically on the basis of the maximum load accepted for each type of fabric and of the required degree of drying.

The countdown is displayed every 30 minutes until it displays “90 minutes” and then hour by hour.

3

End of programme

A flashing zero indicates the end of the programme and it is displayed after the “anti- creasing” phase.

0

Incorrect option selection

If you select an option that is not compatible with the programme you have selected, the display shows Err (error).

1.20

When the programme starts, the remaining time is displayed every 5 minutes.

Delayed start

If you have selected a delay time by means of the relevant button, the display shows it for 2 seconds; then it shows the duration of the previously selected programme.

This code will reappear during the execution of the programme if you press one of the option buttons or turn the programme selector.

6

Image 6
Contents Tumble Dryer Installation Child SafetyUse Contents Energy saving tips Your New Tumble DryerDescription of the Appliance Interest EnvironmentControl Panel End of programme Delayed startDuration of selected programme Incorrect option selectionIndicator Lights 8START/PAUSE buttonProgramme/Time Selector Dial Cooling Programme ChartType of laundry Drying time Max-load Programme LoadOperating Sequence Modifying the programmeDo not overload the appliance Hints & Tips on DryingCare Labels you may find on your laundry Do not use the tumble dryer to dry the followingCleaning the door Maintenance and CleaningExternal cleaning Cleaning the filtersCleaning the drum Cleaning the air intake grilleEmptying the water reservoir 0870 5 Service & Spare PartsSomething Not Working Customer Care DepartmentEuropean guarantee Guarantee ConditionsStandard guarantee conditions ExclusionsInstallation Instructions Technical SpecificationsPositioning Stacking kit optional accessoryUnpacking Door reversalPermanent connection From the Electrolux Group. The world’s No choice