•Alarm code
In the case of a functional problem, the display shows an alarm code (e.g. E21). See page 13 for more detailed information.
E21
“CLOGGED FILTERS” light
This light illuminates at the end of the programme to remind you that the filters must be cleaned.
“FULL TANK” light
This light comes on at the end of the programme to remind you that the water reservoir must be emptied out. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the programme stops, the light of the Start/Pause button flashes.
“CLOGGED CONDENSER” light
It comes on every 80 cycles to remind you that the condenser must be cleaned.
8START/PAUSE button
Press this button to start the dryer after having selected the programme and the options.
The relevant light will stop flashing. If you have chosen a delayed start, the machine will begin the countdown.
If the door of the appliance or the small door at the bottom is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted.
This button must also be depressed after a power failure and after having
In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.
9 Indicator Lights
These lights indicate the following functions:
“DRYING” light
This light indicates that the appliance is in the drying phase.
“COOLING” light
This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.
“END” light
This light is on at the end of the cooling phase, during the
10Programme/Time Selector Dial
Allows you to select electronically controlled or time controlled drying.
Turn the dial to the required programme or time.
Electronically controlled drying (automatic)
The appliance runs these programmes with the help of probes which detect the degree of dampness of the laundry.
Simply select the programme according to the type of laundry and degree of drying required.
Time controlled drying
This can be used to finish off drying if necessary. Select the 90 or 60 minute programme for cottons or the 30 minute programme for synthetics.
To cancel a programme which is running, turn the programme selector dial to “0”.
At the end of drying, turn the selector dial to “0” to switch the machine off before removing the laundry.
7