Zanussi ZDC37100W user manual Start/Pause Button, Indicator lights, Cancelling a programme

Page 11

Start/Pause Button

Press this button to start the dryer after having selected the

programme and the options. The rele- vant light will stop

flashing. If the pro- gramme selector dial is turned to another position, when the machine is running, the buzzer will sound and the programme phase indicator lights will flash. The drum turns alternately in both directions during drying.

All drying programmes end with a 10 minute cooling phase . You may remove the laundry after this phase.

If the door of the appliance or the small door at the bottom is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted.

This button must be depressed also after a power failure and after having reinserted the water reservoir, if it has been emptied in the middle of a pro- gramme after lighting up of light “Empty Tank”.

In both cases the light of the “Start/Pause” button flashes to remind you that the start button needs to be pressed again.

4. Indicator lights

These lights indicate the following functions:

Drying light - this light indicates that the appliance is in the drying phase.

Cooling light - this light indicates that the appliance is in the cooling phase.

End / Anticrease light - this light is on at the end of the cooling phase, dur- ing the anti-creasing phase and at the end of the programme.

Empty Tank light - this light indicates that the appliance is in the drying phase. This light comes on at the end of the programme to remind you that the water reservoir must be emptied out. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the programme stops, the light of the Start/Pause button flashes. This light comes on also when the water reservoir is not inserted correctly.

Filter - this light illuminates at the end of the programme to remind you that the filters must be cleaned.

Condenser- It comes on every 80 cycles to remind you that the con- denser must be cleaned.

Cancelling a programme

Turn the selector dial to “Off” to cancel a programme which is running. You can now select a new programme.

At the end of the programme

If the laundry is not removed at the end of the cycle, the dryer performs an anticreasing phase (duration: 30 min- utes maximum).

If you do not remove the laundry, the dryer will stop automatically at the end of the anti-creasing phase. Lights “End/Anticrease”, and “Empty Tank” remain lit and the buzzer sounds for 2 minutes.

Turn the programme selector dial to “Off” to switch the machine off. Remove the laundry from the drum and

11

Image 11
Contents User Manual Tumble Dryer ZDC 37100 W Contents Risk of Fire Important safety informationInstallation Description of the appliance Control panel Time Drying programmesDrying hints Before the first useGeneral rules Laundry weightsMaximum loads Textile Button Operating sequenceLoad The Laundry Delicate is only suitable for use with loads of up to 3kgAt the end of the programme Indicator lightsCancelling a programme Start/Pause ButtonAfter each use External cleaning Care and cleaningEmptying the water reservoir Reservoir must be re-insert- ed correctly Something not working Malfunction Possible cause SolutionEND Technical data Technical dataMinutes KWh Consumption valuesOld appliance DisposalMachine Stacking kit InstallationUnpacking PositioningElectrical connection Door reversalPermanent connection Exclusions This guarantee does not cover Guarantee/Customer ServiceStandard guarantee conditions 234 Lietuva Suomi Sverige 136905601