End

	Malfunction	Possible cause	Solution
When pressing a		• Washing protection.	• Turn the programme
button, the		After the start of the	knob to “0” Set the pro-
corresponding button		programme, the option	gramme again
flashes several times.		can no longer be set.

Drying cycle ends		• Not enough washing
shortly after
		loaded or washing
programme starts.			• Select time programme
		loaded is too dry for
END	light
		selected programme.
illuminated.

Programme inactive,			• Empty the water reser-
			voir, then start pro-
Water reservoir full		• Water reservoir is full.
			gramme with
light illuminated.
			START/PAUSE button.


		• Lint filter clogged.	• Clean lint filter
		• Heat exchanger
Drying cycle lasts an			• Clean heat exchanger.
unusually long time.		clogged with lint.
			• DELICATE is only suit-
Note: After around 5		• DELICATE button
			able for use with loads of
hours the drying cycle		pressed and load vol-
			up to 3 kg!
ends automatically		ume too big.
			• Reduce load volume.
(see „Drying cycle		• Load volume too big.

complete“)		• Laundry insufficiently	• Laundry must be ade-
			quately pre-drained.
		predrained.

If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

1206

Important:

If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

Malfunction