Cleaning the condenser unit
1.Clean the condenser when light Condenser comes on. The condenser is situated at the lower part of the cabinet behind a small door. To open the door, push the catch as per picture.
During the drying cycle or at the end, it is normal for water to be present on the surface of the condenser insertion.
2.To pull out the condenser, first turn the two red stops downwards.
3.Then remove the con-
denser unit holding it at the handle.
4.Clean the rubber seal round the condenser cabinet and in the inner part of the small door with a damp cloth.
Important:
Do not use pointed objects or utensils to clean the spaces between the plates, as this could damage the condenser and make it permeable.
Important:
Do not use this appliance if the condenser has not been fitted.
Emptying the water reservoir
Important:
Water extracted from the laundry condenses inside the machine and is collected in a reservoir.
The reservoir must be emptied after each drying cycle to ensure efficient operation when the machine is next used. The pilot light Empty Tank reminds you of this operation.
Proceed as follows:
14