Connect Water 2FILL Hoses to Washer | Maytag 40136001 specification

CONNECT WATER

2FILL HOSES TO

WASHER

Tightly push one flat rubber washer into one end of each water fill hose and attach this end of hose to washer. HOT and COLD connec- tions are identified by letters H and C stamped into washer cabinet and by HOT and COLD printed on water fill hoses.

In most cases, hoses should cross when attached to correct water tem- perature faucet.

Tighten hose connections by hand until snug, then another 1/4 turn with pliers. DO NOT cross-thread or over-tighten couplings.

H C

HOT

COLD

Push rubber washer

into end of fill hose.

CONNECT WATER

3FILL HOSES TO

FAUCETS

Before connecting hoses to water supply, turn on faucets and flush lines for approximately 2 minutes to remove foreign matter that could clog filter screens in water mixing valve or fill hoses.

Tightly push one screened filter washer onto remaining end of each water fill hose. Attach water hoses

SECURE

4DRAIN HOSE TO DRAIN

Remove drain hose from shipping position on rear of washer by unhooking hose from retainer clamp. Use beaded tie-down strap to secure “hook” end of drain hose to standpipe, wall inlet hoses, or laundry tub (must hold at least 20 gallons).

IMPORTANT: To prevent siphoning, do not place ribbed portion of drain hose into standpipe. Avoid air-tight seal around standpipe adapter.

For standpipe installation below 36" (91.4 cm), install Siphon Break Kit part #562P3.

For standpipe installation above 48" (121.2 cm), install a check valve to prevent water from flowing back into washer. Available from local hard- ware store.

to HOT and COLD faucets. BE

SURE HOT WATER HOSE IS

CONNECTED TO HOT WATER

FAUCET.

Tighten hose connections by hand until snug, then another 1/4 turn with pliers. DO NOT cross-thread or over-tighten couplings.

Turn on water and check for leaks. If leaks are found, retighten hose couplings. Continue tightening and rechecking until no leaks are found.

		STANDPIPE
		Standpipe
		adapter
		(avoid
		air-tight
	36" (min.)	seal)
	36" (min.)	Beaded
	from floor	Beaded
		tie-down
		strap
		TUB

72" (max.) 36" (min.) from floor

Faucets

HOT

COLD

Screen Filters

HOT	COLD	Hoses
		Hoses

WALL UNIT

Beaded tie-down strap

36" (min.) from floor

Beaded tie-down strap

40136001 specifications

The Maytag 40136001 is a highly regarded appliance that exemplifies quality and innovation in the realm of home laundry solutions. Designed with efficiency in mind, this model stands out among its competitors due to its optimized features, making it a preferred choice for many households.

One of the standout features of the Maytag 40136001 is its powerful motor. With a robust design and impressive torque, this appliance ensures that even the heaviest loads are washed effectively. The motor is engineered for durability, promising reliable performance over time, which aligns with Maytag's reputation for producing long-lasting products.

The 40136001 incorporates advanced wash technology that enhances cleaning performance. It utilizes a unique wash action that combines traditional agitating methods with modern technology, allowing for a thorough yet gentle cleanse, preserving the integrity of fabrics while removing stubborn stains. This model is designed to handle various fabric types, ensuring that clothes come out fresh and clean without any damage.

Energy efficiency is another hallmark of the Maytag 40136001. The appliance is equipped with Energy Star certification, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This feature not only helps consumers save on energy bills but also contributes to environmental sustainability by reducing energy consumption.

In terms of user experience, the Maytag 40136001 boasts an intuitive control panel that makes operating the machine straightforward. The clear display and easily accessible buttons allow users to select from a range of wash cycles tailored to different laundry needs, ensuring unmatched versatility.

Moreover, the design of the Maytag 40136001 prioritizes customer convenience. With a spacious drum capacity, it maximizes load sizes, reducing the frequency of washes and saving valuable time for busy households. The appliance also features a noise-reduction technology that minimizes operational sounds, making it suitable for various living situations.

Overall, the Maytag 40136001 combines robust features, innovative technology, and user-centric design to provide an exceptional laundry experience. Its blend of efficiency, performance, and durability makes it a reliable choice for those seeking a top-tier washing machine. Whether tackling everyday laundry or special items, this model is engineered to deliver outstanding results every time.