Questions & Answers

.....

O. What'sthe bestcycleto useif I havestainson mylaundry?

A. Select the STAIN CYCLE option button and set the control dial on the HEAVY/STAINS setting. Pretreat the stains with a laundry pre-treat product. Refer to the enclosed Laundering Tips booklet for more infor- mation on treating specific stains.

Q.How largeofa loadcan I wash in myMaytagNeptuneTM washer?

A.The tub can be loaded completely full with dry, unfolded clothes. However, do not pack the tub tightly. If the load is heavily soiled it is very important not to overload the washer.

Q. At the endofthe cycle myloadcomesoutwetter thannormal.

A.During tumble and spin the washer may have had difficulty getting to a full spin speed because the load was not evenly distributed. This can occur with small loads, heavy items or a load in which too much detergent was used, causing over-sudsing.

Q. My laundryitemsseemto beverywrinkledat the endofthe cycle.WhatcanI doto correcttheproblem?

A.Wrinkling is caused by the combination of heat and pressure. Be sure wrinkle free or permanent press fabrics are washed on the COLORS or DELICATES cycle, and a cold rinse is used. (See pg. 3 for WASH/RINSE Temperature). DO NOT USE MAX-EXTRACT.

Q. My whites are notaswhite as I'dlike. Whatcan I do?

A.Wash white loads using the WHITES fabric selection. Select the hot wash/cold rinse temperature setting and put 3/4 cup of chlorine bleach in the bleach dispenser. The bleach will be dispensed in the final min- utes of the wash providing for optimal whitening. Maytag recommends a hot water wash temperature of 120-140° F (49 °- 60° C).