Maytag MAH550 warranty Select the Signal

Step 0 Select the Signal

ON	Press ON or OFF for the desired signal option. ON provides an audible signal upon
StGNAL	completion of a cycle. OFF provides no audible signal.

OFF

_:'_ PREWASH		REGULAR
'	'
,/	A

A

Step 0 Select Cycle

/	-,	_	Rotate the control
/			dial clockwise to the
			desired cycle.
NOR!I_L
DELAY HGUR_	©F = _msE

CYCLES	APPROX. CYCLE TIME		DESCRIPTION
REGULAR	The cycles located within		the "Regular" area of the dial are used with most loads.
Prewash	69 minutes	Use for heavily soiled loads. Use I Y:times the usual arnount of detergent
		because the washer drains and refills with fresh water.
		Use with STAIN CYCLE option button for heavily soiled, stained loads.
Heavy	59 minutes	NOTE: The ttEAV¥/STAINS setting is not reeommendedfor use withDeliea
		or /ta,a-Washab/e loads:
Normal	39 minutes	Use for cleaning moderately soiled loads.
Light	33 minutes	Use for cleaning lightly soiled loads.
QUICK		QUICK cycle setting on the left side of the control offers the opportunity to ea,
	33 minutes	ly set the washer for a quick cycle time for lightly soiled loads.
NORMAL	39 minutes	NORMAL	cycle setting on the left side of the control provides a NORMAL
		cycle when setting the washer for a delay start.
		Allows the start of the NORMAL cycle to be delayed for up to 8 hours. Set
DELAY	2 - 8 hours	control dial on the desired number		of delay hours, press the START/STOP 1:
HOURS		ton. NOTE: If the washer door		is opened during the delay time, press
		START	button again.

4