Removing the grilles
The grille can be removed from the AV 5110 for painting.
Use a sharp pin or paper clip to prise the grille out, and remove the anti-
vibration mat.
Replace the anti-vibration mat, and refit the grille by pressing it carefully
back into position, taking care not to bend it.
Painting the AV 5110
The AV 5110 loudspeaker can be painted, if you want to match it to the
colour of your wall. You can use any non solvent based paint, and suitable
paints are acrylic and emulsion paints. We recommend that you spray
paint it to avoid leaving brush strokes.
Before painting the loudspeaker you should remove the grille as described
in

Removing the grilles

, above. Mask the middle section of the speaker,
which is concealed by the grille, and the input terminals. You can now
paint the cabinet and the grille. Leave the AV 5110 and grille to dry, as
recommended in the paint manufacturer’s instructions. Then remove the
masking and refit the grille.
21
setting up the AV 5110